Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Airsoft collection

  • 04-04-2011 8:12pm
    #1
    stigmau5
    Registered Users, Registered Users 2 Posts: 3,269 ✭✭✭


    Selling my guns as I am buying a Magpul Masada and these will be just lying around collecting dust


    King Arms M16
    with full metal RAS
    The original gearbox has been replaced with a fully upgraded one which has had
    Metal bushings fitted and has been shimmed
    New Element Gear set & Anti-reversal latch
    New Aluminium air nozzle with O-ring
    New Bearing spring guide
    New Elements tappet plate
    New Stainless steel cylinder
    Dual O-ring cylinder head
    The receiver is full metal both upper and lower, barrel and RAS are also full metal
    Both the grip and the stock are ABS which stores the large type battery
    Shooting 310ish fps
    Comes with m16 carrying handle not sight shown in pic
    €180 ovno
    All modifications have been done by pervious owner.
    http://i.imgur.com/WJfqx.jpg

    JG AUG A3

    when I bought this it wasn’t firing so I got it looked at and the following work was done.
    Damaged back plate mounts set in Epoxy
    Shim gearbox and fit new Piston O-ring
    Reset hop-up rubber which is king arms and seal with PTFE tape
    firing at 305-320fps and the ROF is 669/min
    also include are a high cap and x3 mid caps
    € 170 ovno
    does not come with scope
    All modifications have been done by pervious owner.
    http://i.imgur.com/5mHrG.jpg

    Jls/ksc hk33.
    Bought this about a month ago and haven’t really used it. The whole electric part of the gun has been taken out and turned into a springier. A new cylinder and harder rubber seals have been installed to silence the gun. Lighter metal gears, new hop-up chamber and a tighter barrel and lots of other little things. I will also include a metal bipod. Has rail for mounting scope put that was only glued on and has fallen off put will include in the sale.
    Does not come with scope
    shoots around 310 fps
    €80 ovno
    All modifications have been done by pervious owner.
    http://i.imgur.com/tYg7g.jpg
    http://i.imgur.com/z5tMd.jpg prevailingly sold to Dean O

    A&K ACR Masada

    Original nylon bushings replaced with Metal bushings & Shim gearbox
    Original Plastic spring guide replaced with Bearing Spring Guide
    the wiring in the gearbox has been replaced and the sliding bolt cover has been repaired and is now working as it was not when I bought it
    G&G long type motor and a Stainless Steel 6.03 Tight Bore 410mm Barrel fitted
    The Masada is firing at 302-316fps and the ROF was 738/min
    before new motor was fitted so I was told it would be around 900ish
    Also comes with tan pmag
    Over 115 euro has been spent on this aeg
    €250 ovvno
    All modifications have been done by pervious owner.
    http://i.imgur.com/iDrQp.jpg
    [COLOR="rgb(255, 140, 0)"]prevailingly sold to xEndzeitx
    [/COLOR]
    Thank you for reading. :)

    Stigmau5
    Tagged:


«134

Comments

Advertisement