CLEAROUT

LAPUA

Selling up

JG G36- got in a trade two days ago. Not my type of gun. Also its broken. The spring and piston are removed from it, there is no motor. sold
1 hi cap, 2 mids and a real cap. 50E ono
C02 thunder S landmine 35E
Brand new. only used for a half days gaming. Its the water one.

CYMA M14 80E
gearbox issue. No clue what it is as im not a tech of any description. But I DO know she rocks a steel tightbore, guarder clear hop up and nub and spits just under the joule.
No Mag, No battery. Can give a battery for 10 Euros if asked

4 brand new MAG mid caps from redwolf airsoft 55E
king arms RAS system rail interface for TM M14. 80E
Fits all clones. CNC machined. Cost me over 100 to get it.

3-9x 40 illuminated scope mil markings. (cod 4 esque crosshairs) with high rings 40E sold
Pics of the lot on request. willing to do special deals on multiple items. collection/ meet up preferred.

Adding to list:

L96 steel barrel stabilizer with ccw silencer attachment. brand spanking new. still in sealed plastic pockets. 15E

WE M1911 mag. Leaks a bit. Again, I dont go and screw with stuff. If you can fix it, good for you.

FOBUS 1911 series holster. 1 takes the gun and the other takes 2 mags. they clip onto belts. Asking 40E

adam_newe

would you sell the real cap on its own?

any pics?

mgsguru

where are you based??

LAPUA

I am based in Dublin. can go as far as city centre.

LAPUA

adam_newe wrote: »

would you sell the real cap on its own?

any pics?

I can sell the real cap for a tenner.

overhand

Offer 30 for the scope collected(if in Dublin)

Sealcon

offer 35 for g36 without real cap

mgsguru

offer 40 for the g36 with the mags if you can meet in clondalkin or tallagh

LAPUA

overhand wrote: »

Offer 30 for the scope collected(if in Dublin)

Overhand, thats a deal at 30. bear in mind the battery is a little flat in the illumination feature. no big deal to replace, and its really a gimik. Can you take this weekend?

LAPUA

mgsguru wrote: »

offer 40 for the g36 with the mags if you can meet in clondalkin or tallagh

mgsguru. I will deal on that and can meet in tallaght. please all ow some time as i have given adan newe first refusal on the real/low cap on its own

mgsguru

the offer was for the complete pack but if adam newe decides to take the mag ill offer you the 35 for the g36 and the remaining mags

LAPUA

mgsguru wrote: »

the offer was for the complete pack but if adam newe decides to take the mag ill offer you 35 for the g36 and the remaining mags

thats fine by me. meeting in tallaght yes?

overhand

LAPUA wrote: »

Overhand, thats a deal at 30. bear in mind the battery is a little flat in the illumination feature. no big deal to replace, and its really a gimik. Can you take this weekend?

Can do Tuesday for sure (I'm stuck with the kids this weekend!)... What make is it? Any marks or scratchs?, I know it's a pain asking, but do you have low mount rings

mgsguru

LAPUA wrote: »

thats fine by me. meeting in tallaght yes?

deal. to pm?

LAPUA

overhand wrote: »

Can do Tuesday for sure (I'm stuck with the kids this weekend!)... What make is it? Any marks or scratchs?, I know it's a pain asking, but do you have low mount rings

i only have high ones im afraid. i could be here tuesday evening since im doing mocks. no scratches. think its swiss arms or strike arms. quality is great. nice crisp image but sure you can see for yourself

LAPUA

mgsguru wrote: »

deal. to pm?

sure. Fire away sir

overhand

Ok to pms, Tuesday it is!!!

LAPUA

PM sent!

Also, added an item to sale ad

Sealcon

was i not first to offer 35 for G36 without mags?

LAPUA

Sealcon wrote: »

was i not first to offer 35 for G36 without mags?

yes but the preference was to sell the lot and with collection. mgsguru had offered similar plus collection.

Sealcon

ok, i would have collected as well, so I think i'm 2nd in line then

LAPUA

Update on m14 information regarding internals
540mm steel 6.03 tightbore barrel
Guarder clear hop up and nub installed
Both from qas Carlow
The gun hits just under the joule each shot when gearbox was working.
Camo paint job also done.

LAPUA

g36 is gone to MGSGURU

Much oblidged for the very easy and pleasant handoff. Appreciate the travel effort made on your part. I hope you use it well and get enjoyment out of it

LAPUA

Some more items added to list!

walks86

pics?

LAPUA

walks86 wrote: »

pics?

sure thing. what have you interest in? so i could provide more detailed shots of it

walks86

the MAG mid caps actually....have you used them or have any experience with them?

LAPUA

walks86 wrote: »

the MAG mid caps actually....have you used them or have any experience with them?

the M14 mag mids?
I recieved them 2 weeks ago from redwolf airsoft. Still actually have the box they came in. I never used these. just stuck one in the m14 once to make sure it fit (it did) and i tested the size of a mag pouch on my vest. thats ALL I ever did with them.

As for my experience with mag brands. My buddy got a batch of eight for his m4. Flawless.

M14 mag mids are metal in construction too

LAPUA

http://www.redwolfairsoft.com/redwolf/airsoft/Magazines_MAG_AEG_MAG_190rds_Metal_Magazine_for_M14_Box_Set_of_4.htm

thats them there.
its a real shame i have to shift them without getting to use them. but something has caught my eye

walks86

man it must have been a very long week cos i thought they were m16 midcaps, not m14 mid caps....my bad....was actually about to offer for them there before i realised they wouldnt work!!:(

LAPUA

walks86 wrote: »

man it must have been a very long week cos i thought they were m16 midcaps, not m14 mid caps....my bad....was actually about to offer for them there before i realised they wouldnt work!!:(

lol. no worries pal im shattered too

1man3letters

hi could i get a pic of the l96 accessories? thanks

LAPUA

Long awaited pics

LAPUA

As you can see, most of the gear (landmine, Mag brand metal mags and RAS rail still have their respective boxes and are in pristine condition)

Here is a list of whats left

CYMA M14 - 80 euro

4x MAG M14 Mids (metal) -55 euro

King arms M14 RAS (cnc machined metal) -80 euro

tasco 3-9x 40 scope. no rings -35 euro

strike arms 3-9x40 illum. mil mark scope. high rings (provisionally sold)

L96 silencer adaptor components. (new in pack) -15


I've had good responses and pleasant hand offs so far. If it continues, I may put up my once skirmished Viper SAAV in olive green. Let me know. Id say it would be around 40 euro asking.

as always, willing to combine reasonable items on deals.

Thanks guys.

1man3letters

would u happen to know if L96 silencer adaptor components would def fit a maurzen?

LAPUA

Idsay they would since they are for well l96 that are clones of maruzens and 1:1 in scale

LAPUA

BUMP! Something very nice has cought my attention!
throw some offers! worst thing that happens is that i say no!

LAPUA

communication (text messages and PMs) with overhand has broken down. scope is still here for sale unless he can respond to tell me otherwise.

Mmawarrior

Offer 25 for scope if deal falls trough

LAPUA

Sorryman. Wouldn't take less than 30 on it. There is one with no rings I would give you for 25. But you would have to collect. It's a 3-9 x 40 tasco. Never skirmished.

Cool Breeze

hiya,

your silencer adapter for the L96 - can you please tell me which make this works for? WELL, TM? etc

Christian.Kelly

Have a friend who might be interested in the m14, depending on price.
Would you go down any lower than 80?
and whats the gearbox issue? Does it shoot? how old is it? come with mag(how much does it hold)? where you based?
any possibility of a package deal?

LAPUA

Hi.
The m14 issue as far as I can tell is an anti reversal latch. I'd say just put it in for servicing and it will be sorted. And I would nearly say I am capable of moving on price a bit considering.
Has he an offer for me to consider?
The whole lot; mags rail gun and a battery would cost 240 do not expect that amount. willing to negotiate an offer. Could even throw something like a scope in for free if it's a good offer. Hope that helps.

If you wanted, I could take the tightbore and
Hopup out of the gun, throw in a mag mid cap and give it youfor 50-60 collected?

Christian.Kelly

If you wanted, I could take the tightbore and
Hopup out of the gun, throw in a mag mid cap and give it youfor 50-60 collected?[/QUOTE]

Hmm...i'll check again with him today, I dont think he wants the scope though, he's a bit to simple for sniping
He wants a working m14, simple as that, I dont think he'll mind bringing it for maintenence.
I dont think he'll want any of the scope,rail stuff. He's literraly just looking for the gun and mag and maybe battery.

Maybe the gun, a mag together for around 80, he's a bit lowish on cash atm but he has around 70 and will be gettin more soon

Does it still shoot?

LAPUA

Ah a utilitarian
Sadly the gun does not shoot. I connect a battery and hear the black and decker noise.
If he wants to do the gun, a mag and a battery for 80, I would accept. Could meet you around city centre or in the Dublin 16 area
That's leaving the tightbore and hop up in it which cost the better part of 40 euros anyway.

Once it's out of the shop, it should be firing in the joule every shot. I've had some insane range on it.

Christian.Kelly

LAPUA wrote: »

Ah a utilitarian
Sadly the gun does not shoot. I connect a battery and hear the black and decker noise.
If he wants to do the gun, a mag and a battery for 80, I would accept. Could meet you around city centre or in the Dublin 16 area
That's leaving the tightbore and hop up in it which cost the better part of 40 euros anyway.

Once it's out of the shop, it should be firing in the joule every shot. I've had some insane range on it.

Seems good
Talked to him about it today, he seems happy with it.:D
Any idea How much would it cost to fix though? Like, wouldhe need to buy new parts?

Mmawarrior

Ok 25 offered for the cheaper strike arms scope?,

LAPUA

Christian.Kelly wrote: »

Seems good
Talked to him about it today, he seems happy with it.:D
Any idea How much would it cost to fix though? Like, wouldhe need to buy new parts?

well different places give different prices. an example i could give would be go tactical in bray. a buddy sent a gun in. came back working a treat. Labour is 35 euros as a start. Id say all you need is anti reversal latch and maybe new wires. The V7 gearbox inside m14s are not really designed for full auto fire as stock as you may know. a new motor will suss that though if its rof hes after. Only in fairness, you cant knock it when its shooting stock.

LAPUA

Mmawarrior wrote: »

Ok 25 offered for the cheaper strike arms scope?,

Its a tasco. And without rings.
Can you reach knocklyon? Id deal at 25.

Mmawarrior

What's the difference between the tasco and the strike arms?

LAPUA

guess its the brand really. and the crosshair type. Mil lines vs a standard one. no biggie really. the picture quality quality is the same as are the levels of zoom. I could even let you look through the strike arms one to compare.