G&P 8mm Gearbox

Airsofter101

Hi there,

Have a G&P 8mm Gearbox
Internals:
G&P Piston
G&P Piston Head
G&P Cylinder
G&P Cylinder Head
G&P Gear Set
G&P Anti-Reversal Latch
G&P Tappet Plate
G&P Air nozzle
G&P Trigger
G&P Spring (M100 I think )
G&P 8mm Bearings
G&P Shims
Guarder Wiring Set
Selling for E80
Note neither gearbox comes with a selector plate!

Have another one same as above but has a crack on the side and I'd say it could break if used but still selling! E30

Leftyflip

Offer asking on the one with the cracked shell.

Airsofter101

Ohh total disaster! I knew it wouldnt last! Fired it one last time in the AEG and crack! Sorry Lefty, I can trough in a Stock motor from a "colt M4" on the gearbox above. So sorry man!:(

Leftyflip

Don't worry, I just want it for the insidey bits

Airsofter101

Well if I find the stuff that went flying when it cracked its yours but I cant guarantee anything atm!

DeBurca

Airsofter101 wrote: »

G&P Full metal gearbox, Internals:
G&P Gears, Piston, Piston head, Cylinder, Cylinder Head, 8mm Bearings, M85 Spring, Guarder switch set with silver wiring! NOTE gearbox has a "gammy" trigger contact but has a brand new switch set installed so you only have to change the part that moves.

Is this the same G&P gearbox that you were selling last night for €55 and then withdrew it from sale but later changed you mind or have you a 3rd G&P gearbox
Are you still not interested in posting ???

Airsofter101

No this is a different one, keeping the one from that old post and the other one cracked earlier! I suppose I will try your postal order method if you want the gearbox!

DeBurca

Airsofter101 wrote: »

No this is a different one, keeping the one from that old post and the other one cracked earlier! I suppose I will try your postal order method if you want the gearbox!

A different one :rolleyes: may I ask as to where you got all these G&P gearboxes ????

Airsofter101

ehobbyasia!

DeBurca

Do you think that there may be a flaw in the gearboxes as you have one that was cracked and is now broken

Airsofter101

No that was my own fault, when I was putting it into the AEG body I used a hammer because it was tight(thats what she said) and sure it was a disaster waiting to happen!

DeBurca

Airsofter101 wrote: »

No that was my own fault, when I was putting it into the AEG body I used a hammer because it was tight(thats what she said) and sure it was a disaster waiting to happen!

I will pass given the level of skill you have and your style of workmanship
I always say if it does not fit then use a bigger hammer but I never thought somebody was fool enough to believe me

Airsofter101

So lads still for sale only one gearbox left, Im open to offers and trades!;)

AlternateID

I'll give you €50 cash for an unhammered gearbox including all of the parts listed in your first post.

Airsofter101

Only the gearbox that was for E30 was hammerd!

Ill let it go for E65

Leftyflip

If it was hammered, I'll pass thanks.

AlternateID

Airsofter101 wrote: »

Only the gearbox that was for E30 was hammerd!

Ill let it go for E65

€50 note is all I'll give. That would be collection Dublin of course.

Airsofter101

Won't let it go for that price! Cost 100 brand new! You can have it for 65

AlternateID

Airsofter101 wrote: »

Won't let it go for that price! Cost 100 brand new! You can have it for 65

I need the extra 15 to buy a hammer. Please post a pic of the box.

Airsofter101

Not letting it go for less than 65!

AlternateID

Airsofter101 wrote: »

Not letting it go for less than 65!
/QUOTE]

Thanks for the pic. I can't see that one for sale on ehobby.

Airsofter101

http://shop.ehobbyasia.com/upgrade-part/parts-upgrade-aeg/gearboxs/gandp-8mm-reinforced-bearing-gearbox-set-for-m4-series-rear-wiring-tamiya.html

Its that one with a new wiring set as stated!

AlternateID

Airsofter101 wrote: »

http://shop.ehobbyasia.com/upgrade-part/parts-upgrade-aeg/gearboxs/gandp-8mm-reinforced-bearing-gearbox-set-for-m4-series-rear-wiring-tamiya.html

Its that one with a new wiring set as stated!

Sorry to harp on. That box has a different cylinder from your pic.

Airsofter101

Yep, I know. Email ehobby the same question! They said it was the older version!

AlternateID

Airsofter101 wrote: »

Yep, I know. Email ehobby the same question! They said it was the older version!

ok with unknown cylinder, no selector plate, Cocking Handle, Magazine Catch, Bolt Stop, Trigger Guard or Selector then I'm sticking with my original offer of €50 collected.

Airsofter101

Okay,

Still for sale E65 and its yours:)

Airsofter101

AlternateID wrote: »

ok with unknown cylinder, no selector plate, Cocking Handle, Magazine Catch, Bolt Stop, Trigger Guard or Selector then I'm sticking with my original offer of €50 collected.

I'll take Ur offer into consideration! But the above did not come with all that stuff either!

AlternateID

Airsofter101 wrote: »

I'll take Ur offer into consideration! But the above did not come with all that stuff either!

The one you linked did.

Airsofter101

Yes I understand that! Email e hobby if u don't beleive me!

AlternateID

Airsofter101 wrote: »

Yes I understand that! Email e hobby if u don't beleive me!

Sorry what I'm saying is if that's the one you bought then you are missing a fair bit of what should of come in the package.

Airsofter101

As I said I understand, I have put a new wiring set into it which cost an additional 20 euro! Look it's 65 for it! That's all the info u need

AlternateID

Airsofter101 wrote: »

As I said I understand, I have put a new wiring set into it which cost an additional 20 euro! Look it's 65 for it! That's all the info u need

Thanks. Offer withdrawn.

Airsofter101

Thank you! Still for sale! 65 and it's yours!

Airsofter101

Price drop E60

Bailey.!

giv u 5 Dolla .,

Airsofter101

Good man Bailey, but Im gonna have to turn that offer down!

Bailey.!

Alri but youll be back .,

THE MINDER

Are you aywhere near the north side of Dublin-could meet -offer 45 cash.I know you put a new switch in it but its unsuitable for the G+P unless you do modifications to the shell-also I'm guessing you have the tappet plate but there is no plate on it to marry prongs on switch.If you wish I'll whip the guarder switch out for you to sell seperately-I live in No County

Airsofter101

I dont know what your on about? I fitted the switch myself with no mods! Worked grand, I just need the selector switch(not the tappet plate!) for a different gearbox! Not letting it go for less than E60! Iam based in Glasnevin

THE MINDER

No worries-tks for reply:)

Airsofter101

Bump

Villafan6

any chance of you including the selector plate

Airsofter101

I could, but I havent a clue if its working or not, thats why I didnt want to include it in the first place!

Villafan6

sorry but I just read over the thread and i don't want a gear box that was hit with a hammer

Airsofter101

OMG, Who said it was hit with a hammer!???!!!

I hit the other gearbox that was for sale for E30 with a hammer then that cracked! I havent touched this gearbox with a hammer

Villafan6

ah sorry just noticed you were selling two not one sorry about that.

I'll have a think about it, i just want to look around for a selector plate first

Airsofter101

Okay no problem man!

Villafan6

sorry one more question, If i get the selector plate is this a complete gearbox, like could i just replace this with my own or would I need something else.
Thanks

Airsofter101

I have tested it with a G&P selector and it works fine! So yea...:)

Villafan6

so you have a selector switch now ?

Airsofter101

I have one spare as said above, dont know if the selector works or not! I have another one that works but Im using it in my other AEG