Advertisement

Shooting Forum - Firearms licencing information


Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Lanber shotgun

  • 29-11-2010 07:53PM
    #1
    jwoods
    Registered Users, Registered Users 2 Posts: 23 ✭


    Hi all
    I have a lanber shot gun and the single bead sight on the gun has come off never to be seen again. Can I get a replacement one handy enough if so where would be my best bet to get one?


Comments

  • #2
    FOXHUNTER1
    Registered Users, Registered Users 2 Posts: 193 ✭✭FOXHUNTER1


    You should be able to pick one up handy in any gunshop.
    There are a few different thread sizes varying from 3 to 4.5 mil


  • #3
    deerhunter1
    Registered Users, Registered Users 2 Posts: 2,766 ✭✭✭deerhunter1


    FOXHUNTER1 wrote: »
    You should be able to pick one up handy in any gunshop.
    There are a few different thread sizes varying from 3 to 4.5 mil

    i bought a set from Duffies in galway a few weeks ago, I think 12 euro, go to your local gun shop, any guns for scrap you might get the sight off one


  • #4
    jwoods
    Registered Users, Registered Users 2 Posts: 23 ✭jwoods


    Ah sound only spotted it missing there when I was cleaning the gun. I will make a phone call to the local gun shop in the morning see do they have one. I assume your only talking small money for it?


  • #5
    ak51535
    Registered Users, Registered Users 2 Posts: 395 ✭✭ak51535


    Lanber Victoria II? same happened to mine, was always unturning itself after a shot, lost it there too about 3 months ago, been firing it without it ever since....must call into town and source a new one


  • #6
    barryfitz
    Registered Users, Registered Users 2 Posts: 553 ✭✭✭barryfitz


    hmmmm... was out with the brothers Lanber there when he was away on holiday and was just lucky to see it was twisted before it came off completely. Thought I had broken it and then realised it was threaded. Seems to be a common complaint based on this thread alone!!


  • Advertisement
  • #7
    FOXHUNTER1
    Registered Users, Registered Users 2 Posts: 193 ✭✭FOXHUNTER1


    jwoods wrote: »
    Ah sound only spotted it missing there when I was cleaning the gun. I will make a phone call to the local gun shop in the morning see do they have one. I assume your only talking small money for it?

    Should be around 3.50 to a fiver depending on the type.


  • #8
    T223
    Registered Users, Registered Users 2 Posts: 73 ✭✭T223


    barryfitz wrote: »
    hmmmm... was out with the brothers Lanber there when he was away on holiday and was just lucky to see it was twisted before it came off completely. Thought I had broken it and then realised it was threaded. Seems to be a common complaint based on this thread alone!!
    I have a lanber 2097 sporter and i never had any problems with it wot so ever.For the abuse it gets i find it a great solid.reliable gun.


  • #9
    jwoods
    Registered Users, Registered Users 2 Posts: 23 ✭jwoods


    ak51535 wrote: »
    Lanber Victoria II? same happened to mine, was always unturning itself after a shot, lost it there too about 3 months ago, been firing it without it ever since....must call into town and source a new one

    The lanber I have is model no. 2087 not a 100% sure on that have it a good few year now.


Advertisement