Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Washer Dryer won't stop on wash cycles

  • 13-09-2009 11:51pm
    #1
    athtrasna
    Closed Accounts Posts: 13,420 ✭✭✭✭


    Have a Hotpoint Washer Dryer (WDD40G) - not by choice! - and as of today it just doesn't want to stop on a wash cycle. Have tried 3 different ones (normally 30, 45 and 65 mins) and all still running after 2 hours. Only way to sort it is empty the drum and then select rinse and spin.

    It's still under guarantee but I'm just back from hols and can't afford the time off if I don't have to take it.

    Any ideas? Manual says select a different programme :confused:


Comments

  • #2
    knighted_1
    Closed Accounts Posts: 870 ✭✭✭knighted_1


    sounds like the heating element is bust -not advancing thru the programme -machine will continue to wash until water reaches desired temp and then thermo stat clicks over to next part of cycle ,not happening so i would check element first


  • #3
    miju
    Banned (with Prison Access) Posts: 8,486 ✭✭✭miju


    few different but obviousl things. check the fill hoses aren't kinked at the back as this will cause a really slow fill. Also disconnect the fill hose and make sure the filter where the hose attaches to isnt clogged with any deposits.

    after that theres a few other things too.


  • #4
    knighted_1
    Closed Accounts Posts: 870 ✭✭✭knighted_1


    miju wrote: »
    few different but obviousl things. check the fill hoses aren't kinked at the back as this will cause a really slow fill. Also disconnect the fill hose and make sure the filter where the hose attaches to isnt clogged with any deposits.


    machine is washing constant so must be getting water ,can rinse and spin so is getting water


  • #5
    athtrasna
    Closed Accounts Posts: 13,420 ✭✭✭✭athtrasna


    it's happenning again. Can't say if it's the same machine or a new one, had a really bad run on appliances and have replaced them all, can't remember when. Any ideas?


Advertisement