AirsoftEire.com

Blazer

Guys..looking at the scope below for my Classic Army M24..
Would I need the high scope rings on it for that scope?
The present scope is a 4-9x 50mm (not sure of the make..chinese made anyway) pic attached..if you need a clearer one let me know..but I estimate maybe 5mm at most between scope and barrel at endpoint.

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=452&category_id=18&manufacturer_id=0&option=com_virtuemart&Itemid=26

Blazer

Also guys I emailed Classic Army about replacement mags for my CA M24.
They gave me the name of their distributor (ASG) and I notice you're one of their retailers? Would you be able to source these for me?

AirsoftEire.com

Berkut wrote: »

Guys..looking at the scope below for my Classic Army M24..
Would I need the high scope rings on it for that scope?

It’s hard to tell if it would fit, it would be very close .The outer diameter of the front part of the Strike 3-9X56e Scope – Illuminated that we have is 66mm. If you compare that to the outer diameter of your current scope you should know if you need the high rings or not.

We can indeed source the mags for you they would be €12.99.
Liam

Blazer

Thanks Liam... can you order me 3 x M24 mags please? No rush on those
I'm pm you my account name.

Ok..my current scope is approx 56mm which means the strike wouldn't fit with my existing scope rings. Any ideas? I have the high scope rings already (42mm) so presume I would need higher ones or else drop to a lower magnification scope

AirsoftEire.com

Hi again.
Unfortunately if you already have high scope rings, there's not a lot you can do as we don't have any scope rings available to us with a height of more than 20mm (from the rail to the ring). I presume the height of your own is also 20mm?

Steve

DirtDiver

hey lads, just wondering i made an order there about 10 minutes ago. order ref Transaction ID: 0TU45973F46304911, just checking if i'll have it by friday?

Cheers
Dirt

AirsoftEire.com

You should do, it will ship out on Thurs evening and delivery will be made on the Friday. Thanks.

Steve

Blazer

AirsoftEire.com wrote: »

Hi again.
Unfortunately if you already have high scope rings, there's not a lot you can do as we don't have any scope rings available to us with a height of more than 20mm (from the rail to the ring). I presume the height of your own is also 20mm?

Steve

yep..I think they're a height of 42mm in total.. might check around and see if I can get some..I really like that scope

AirsoftEire.com

It is a great scope, but even on eHobby and Redwolf they have no rings above 20mm in height. Do you have any method of raising the rail off the rifle, perhaps stick some padding underneath it?

Steve

Blazer

AirsoftEire.com wrote: »

It is a great scope, but even on eHobby and Redwolf they have no rings above 20mm in height. Do you have any method of raising the rail off the rifle, perhaps stick some padding underneath it?

Steve

I'll work on something to get it

Inari

Sorry to but in, but have you considered a raiser mount? Just a hunk of metal with an RIS/RAS rail on top, that connects to standard RIS/RAS rail. Should give you the clearance necessary

Blazer

Inari wrote: »

Sorry to but in, but have you considered a raiser mount? Just a hunk of metal with an RIS/RAS rail on top, that connects to standard RIS/RAS rail. Should give you the clearance necessary

sounds good..I'll check it out..

actually these are 30mm..should be ok I guess..

http://www.airsoftpanda.com/product_info.php/cPath/107_111/products_id/203?osCsid=t8d13nqq2oapa1rlp6qc4p94d3

DirtDiver

thanks Steve

Got my charger today, i only ordered it wednesday night great service.

Cheers

Richbert

doncarlos

Just want to say well done on the shop.
Visited it last Saturday and was very impressed! Keep up the good work lads!

Washington Irving

AirsoftEire.com wrote: »

Hi again.
These are arriving in about two weeks time, depending on volcano ash.

Steve

Any update on the Pantac Wasatch Chest Rig lads?
Cheers

Blazer

SAULGOODE9 wrote: »

Any update on the Pantac Wasatch Chest Rig lads?
Cheers

got one of these only bout 4 weeks ago from airsoft..fantastic vest ..well worth the money


PS. Airsoft...did ye order those CA M24 mags for me? Was looking for 3 of them.

AirsoftEire.com

SAULGOODE9 wrote: »

Any update on the Pantac Wasatch Chest Rig lads?
Cheers

In stock as of now, view them here: http://www.airsofteire.com/index.php?page=shop.product_details&category_id=9&flypage=shop.flypage&product_id=643&option=com_virtuemart&Itemid=26

Berkut wrote: »

got one of these only bout 4 weeks ago from airsoft..fantastic vest ..well worth the money


PS. Airsoft...did ye order those CA M24 mags for me? Was looking for 3 of them.

Mags haven't been ordered yet, but will be added to our next order in approx 1-2 weeks time.

Steve

Blazer

AirsoftEire.com wrote: »

In stock as of now, view them here: http://www.airsofteire.com/index.php?page=shop.product_details&category_id=9&flypage=shop.flypage&product_id=643&option=com_virtuemart&Itemid=26



Mags haven't been ordered yet, but will be added to our next order in approx 1-2 weeks time.

Steve

thanks Steve

Washington Irving

AirsoftEire.com wrote: »

In stock as of now, view them here: http://www.airsofteire.com/index.php?page=shop.product_details&category_id=9&flypage=shop.flypage&product_id=643&option=com_virtuemart&Itemid=26

Steve

Just ordered there.
Cheers Steve

AirsoftEire.com

After many requests, Tanio Koba barrels now in stock!

Available in 3 lengths to begin with, suitable for Marui's VSR, all M4s, 551s, SCARs, MP5s and P90s.



Also, Marui's fabulous Type-89 in stock, FULL metal!



And the daddy, SOCOM Gear V2 Barrett M82, cheaper than the Asian sites:

DirtDiver

i have a store coupon of €12 or so that was sent to me via email after an item i ordered wasn't in stock, i tried to buy a small connector this one

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=252&category_id=12&manufacturer_id=0&option=com_virtuemart&Itemid=26

And my coupon would not work and the order was cancelled, could you sort out my order for me please.

Thanks
Richbert

ps. the original order number was 3313

gerrowadat

Oo, TK twist barrels, finally someone has them.

Any chance you'd be getting some M16 ones in?

AirsoftEire.com

DirtDiver wrote: »

i have a store coupon of €12 or so that was sent to me via email after an item i ordered wasn't in stock, i tried to buy a small connector this one

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=252&category_id=12&manufacturer_id=0&option=com_virtuemart&Itemid=26

And my coupon would not work and the order was cancelled, could you sort out my order for me please.

Thanks
Richbert

ps. the original order number was 3313

You have mail.

gerrowadat wrote: »

Oo, TK twist barrels, finally someone has them.

Any chance you'd be getting some M16 ones in?

Sure, we'll have more lengths in about 3 weeks time.

Steve

Blazer

Any chance of getting one in for a CA M24?

Chuck the Buck

Once again lads I've ordered stuff off ye yesterday at about 3:00pm and had the postman hammering on the door at 8:30am today for me to sign for it

Only way to get faster service than from airsofteire is if the other shop has a time machine and can deliver half an hour before you realised you wanted anything!

AirsoftEire.com

Berkut wrote: »

Any chance of getting one in for a CA M24?

I'm not sure what the barrel length of the M24 is, if it takes a standard AEG barrel then we can more than likely get a twist barrel for it.

Chuck the Buck wrote: »

Once again lads I've ordered stuff off ye yesterday at about 3:00pm and had the postman hammering on the door at 8:30am today for me to sign for it

Only way to get faster service than from airsofteire is if the other shop has a time machine and can deliver half an hour before you realised you wanted anything!

Great stuff, thanks for your order.

Steve