My latest cascade. 56k warning

unseen

Well i havent make a cascade for long time. A really good friend who is a really gooood overclocker asked me if i can make one for him. I said ok but you have to wait! I started collecting the parts in the middle of june. Lets take a look at them:

A really big condeser, a huge fan, alco safety device ,two gauges for high pressure, plate hx in a shoebox with foam , flex hose ~1m









The compressors i choose are for first stage 18000btu and for second 12000btu. Gases R507 for the first and R1150 for the second.



The evaporator is a special edition made by eleven. 50mm diameter.


http://www.xtremesystems.org/forums/showthread.php?p=2327712#post2327712
Thanks mike for the support!

A big galvanized plate

unseen

Also a small condeser as desuperheater and an auto oilseparator.
And i started soldering the stuff.





My small secret in this cascade is that after many many many many attemps to find the best capillary for 1st stage i finally found it!(I also tried cpev,tev) I used not one but TWO capillaries in parallel. 1,8m x2 0,78 type. I used that cause 1.2 capillary type or 1.5 neither worked ok and with smaller type i had very high pressures. The result is that now i have a very strong first stage and we all know how much important is this. Idle -62c and load -57c to the exit of the hx. High pressure is at load ~14bar at ~25c ambient.


Ethylene came after 20 days of waiting


And i reached -113 with 3,55cm of 0,91 capillary type in second stage.


I hooked it to my 6850es,p5k-e



Very good contact. Take a look where i put the thermal probe. It is the yellow cable.

unseen

Some first results cause i still havent tune it
Here at 3600@1,36real idle

and here at little load


Now i fed my processor with 1,87 and i ran some test at ~5250
here at spi 32m


and here at wprime 1024m which uses both cores.


hexus


Superpi 1m .Max pi@5416


max cpuz


http://valid.x86-secret.com/show_oc.php?id=239875

I am waiting the top of the case to finish it. I will update when it is ready.
The color will be a very nice red. It is called "Rocky red" and it is paint for expensive cars. Also i have to insulate many pipes and tune the cascade for quad cores.


Thanks for looking-reading and sorry for my really bad english.
Christos

Creamy Goodness

where's the computer

ricka05

I thought my 120mm zalman is huge.....



P.S. Can it be used as a bear chiller?

awhir

wow man that is so cool.that is a very nice clock with that e6850 also.

i want phase

btw: i have never seen a phase overclock over 5ghz ??is that a record ?

papu

not quite a record but he's getting close

X6800: coolaler - 5525.89 MHz http://www.iamxtreme.net/coolaler/WR...526_9000S_cpuz
E6700: bunnywk - 5142.43 MHz http://www16.big.or.jp/~bunnywk/pi/C...iMod1M-LN2.png

soo close

TheHairyFairy

Photoshop!

nibble

Oh man, that's a cascade and a half. I wonder how it would hold a quad... Anyway excellent work there man, looks very well put together. Your from Greece, yes?

Anti

nibble wrote:

Oh man, that's a cascade and a half. I wonder how it would hold a quad... Anyway excellent work there man, looks very well put together. Your from Greece, yes?

/me bows down before the cascade.... Top work man

Inquitus

Nice, damn fine cascade.

Now how much do you charge

unseen

Hi again guys

Thanks for the kind words.

Yes i am from Greece but i am planning to move to dublin in a few months so i can meet you there.

This cascade is a bit expensive. I used top quality parts. ~1,5k€ it think. I still havent calculate the final price.


byee

PogMoThoin

Nice work m8, lookin forward 2 having you helping us oc'er ere in Irl :P

Chosen

Oh hi Chris (unseen), I have a question for you: wtf are you still doing there?


We are already 3 greeks here in Dublin, all waiting for your highness to come over and start building them, and I'm the first in line, the rest will have to wait

Fantastic work btw, mate and great cpu too

Anti

2nd in line

unseen

heheheee I will make phase change systems for anyone who wants one but first i have to find a job there and then my hobby.

Take a look some single stages to my site
http://www.myfreezepack.com/index.php?option=com_ponygallery&Itemid=26&func=viewcategory&catid=10&startpage=2

Thanks
christos

awhir

cool.

would you be able to build me 1 if i was able to supply the parts minus the case and evap.?

unseen

Finished! The paint job will be done by the customer.




Compared to vapochill
Size does matters!!

conzy

haha! Its the size of a dishwasher

Chosen

Teh awesomeness supreme! :eek:

papu

how heavy is it?!

awhir

papu wrote:

how heavy is it?!

as heavy as ur ma which is heavy

papu

banzor him plx

Anti

awhir banned for life. ggkthnxbia

papu

Anti wrote:

awhir banned for life. ggkthnxbia

LIES!

Anti

We cant ban little andy, thats just cruel.

awhir

Anti wrote:

We cant ban little andy, thats just cruel.

little ? im 6ft tall

unseen

I finished another one This time is painted black.

papu

unseen wrote: »

I finished another one This time is painted black.
and on its way to papu

Fixed! :D

---

Very very nice work....but the question is what can it do? tried it out yet?

awhir

unseen wrote: »

I finished another one This time is painted black.

around how much does one cost.

unseen

@papu
Is this works for you?



@awhir Bro it costs a lot cause a bottle of ethylene is too expensive here.

KamiKazi

unseen has temperature hacks!

papu

unseen wrote: »

@papu
Is this works for you?

hehe , i see it works very well , congrats!:D

The Real B-man

Jaysus!