Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Heating coming on at random times, when timer is off

  • 24-01-2020 10:13pm
    #1
    Sofiztikated
    Registered Users, Registered Users 2 Posts: 6,995 ✭✭✭


    I've a weird one.

    Oil central heating comes on at random times, even though the clock is set to OFF. I've went through and turned any set times to off, but still randomly coming on.

    I'm not complaining that the house is warm, but if it's burning oil when I'm not there, then it's a bit daft.


Comments

  • #2
    John.G
    Registered Users, Registered Users 2 Posts: 3,551 ✭✭✭John.G


    If your house is zoned then its more than likely that one of the zone valves is faulty as its this (these) that give the run signal to the boiler.


  • #3
    wiz569
    Registered Users, Registered Users 2 Posts: 1,707 ✭✭✭wiz569


    John.G wrote: »
    If your house is zoned then its more than likely that one of the zone valves is faulty as its this (these) that give the run signal to the boiler.

    But doesn't the clock/programmer need to send a live signal to the zone valve first?


  • #4
    John.G
    Registered Users, Registered Users 2 Posts: 3,551 ✭✭✭John.G


    wiz569 wrote: »
    But doesn't the clock/programmer need to send a live signal to the zone valve first?

    It does but the actuator head often doesn't close the valve when it developes a fault and it's end switch is still made which gives the run signal to the boiler. It's a fairly common fault and sometimes the zone with the faulty actuator will continue to heat. You will generally feel a good spring resistance when manually opening a de enerized zone valve.


  • #5
    CoBo55
    Registered Users, Registered Users 2 Posts: 9,315 ✭✭✭CoBo55


    Frost stat if it's an outdoor boiler.


Advertisement