If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

tension rod won't screw into floor tom

by8auj6csd3ioq · 2019-01-10 13:51:56

tension rod won't screw into big tom edit. it was not the floor tom it was the big tom. sorry

10-01-2019 2:51pm

#1

by8auj6csd3ioq

Closed Accounts Posts: 1,124 ✭✭✭

Join Date: September 2008

Posts: 937

tension rod won't screw into big tom

edit. it was not the floor tom it was the big tom. sorry

0

Comments

#2 10-01-2019 3:12pm

Gaspode

Moderators, Category Moderators, Music Moderators, Regional East Moderators, Regional Midlands Moderators, Regional Midwest Moderators, Regional Abroad Moderators, Regional North Mods, Regional West Moderators, Regional South East Moderators, Regional North East Moderators, Regional North West Moderators, Regional South Moderators Posts: 8,037 CMod ✭✭✭✭

Join Date: November 2004

Posts: 7313

Sounds like the threads were done properly at the factory, just get back onto where it as bought & tell them. They should replace it no hassle.

0
#3 11-01-2019 2:54pm

FR85

Registered Users, Registered Users 2 Posts: 491 ✭✭

Join Date: September 2012

Posts: 443

As mentioned it sounds like the threads in the receiver of the lug box might be incorrect. DW Drums actually use a different thread to Pearl/Yamaha/Mapex/Tama ect, it's a much finer thread so make sure that this too isn't the case....

0