Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Roller shutter door

  • 19-04-2019 10:09am
    #1
    rpbpaul
    Registered Users Posts: 1 ✭


    Hi.
    I am currently building a workshop for myself. I bought a used roller shutter door and I am trying to install it. My problem is the door height. to maximise same, I do not have enough head room to fit the motor. My question is can the motor be installed upside down, as this will give me the room to fit the motor. The door is a sectional door with a spring tension'er, and the motor is attached to a little gearbox which turns the door shaft. I hope someone can help with my problem.
    Thanks in advance.


Comments

  • #2
    yop
    Moderators, Home & Garden Moderators, Regional Midwest Moderators, Regional West Moderators Posts: 16,724 Mod ✭✭✭✭yop


    rpbpaul wrote: »
    Hi.
    I am currently building a workshop for myself. I bought a used roller shutter door and I am trying to install it. My problem is the door height. to maximise same, I do not have enough head room to fit the motor. My question is can the motor be installed upside down, as this will give me the room to fit the motor. The door is a sectional door with a spring tension'er, and the motor is attached to a little gearbox which turns the door shaft. I hope someone can help with my problem.
    Thanks in advance.

    Can you post a few pics? I put in my own and motorised it, but I'm not clear on what the problem is.


Advertisement