If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Missing M.2 screw Tomahawk B450

[Deleted User] · 2020-01-28 12:06:54

Anyone know the spec and place to procure the screw for M.2 Drive screw, on a MSI B450 Tomahawk Max? Standoff space is on the board but no screw. Apparently they can be taped to the back of the board, no luck. Took out the box and not in that either.

28-01-2020 1:06pm

#1

[Deleted User]
Posts: 0 ✭

Join Date: -

Posts: 0

Anyone know the spec and place to procure the screw for M.2 Drive screw, on a MSI B450 Tomahawk Max?

Standoff space is on the board but no screw. Apparently they can be taped to the back of the board, no luck. Took out the box and not in that either.

0

Comments

#2 28-01-2020 1:54pm

Cuddlesworth

Registered Users, Registered Users 2 Posts: 13,997 ✭✭✭✭

Join Date: August 2005

Posts: 13714

they are usually M2 2mm flat top screws. Best option would just to be buy some off amazon, thats the type of thing that's next to impossible to pick up easy here.

0
#3 28-01-2020 4:41pm

KilOit

Registered Users, Registered Users 2 Posts: 3,001 ✭✭✭

Join Date: July 2003

Posts: 2918

Check the box again, should be in a little bag

0
#4 28-01-2020 4:46pm

[Deleted User]
Posts: 0 ✭

Join Date: -

Posts: 0

sugarman wrote: »

If youre stuck and happen to have a 2.5" drive laying about, the screws used to hold down the PCB are M2 and fit perfectly fine.

I actually do somewhere. Will have to go take a look

0
#5 28-01-2020 4:47pm

[Deleted User]
Posts: 0 ✭

Join Date: -

Posts: 0

KilOit wrote: »

Check the box again, should be in a little bag

I have, repeatedly.
And the back of the MB where they can be attached

0
#6 28-01-2020 4:51pm

[Deleted User]
Posts: 0 ✭

Join Date: -

Posts: 0

At least the standoff is there, it's MSI propitiatory so hoping that the screw is standard

0
Advertisement