Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Qashqai 2012 J10 ball joint

  • 18-09-2020 9:45am
    #1
    Asmodean
    Registered Users, Registered Users 2 Posts: 1,644 ✭✭✭


    Does anyone have any idea if the lower control arm ball joint for a 2012 qashqai can be replaced seperately or do I need to change out the entire arm? The joints are sold seperately but I've read some conflicting views on the repair so I'm not too sure. Cheers.


Comments

  • #2
    Toyotafanboi
    Registered Users, Registered Users 2 Posts: 12,917 ✭✭✭✭Toyotafanboi


    You can do it seperatey but it needs to be pressed into place iirc so it may be cheaper or more practical to do the whole arm.


  • #3
    turbostan
    Registered Users, Registered Users 2 Posts: 216 ✭✭turbostan


    Asmodean wrote: »
    Does anyone have any idea if the lower control arm ball joint for a 2012 qashqai can be replaced seperately or do I need to change out the entire arm? The joints are sold seperately but I've read some conflicting views on the repair so I'm not too sure. Cheers.

    Press-in ball joint, common nct failure, not a big job at all


  • #4
    mk7r
    Registered Users, Registered Users 2 Posts: 784 ✭✭✭mk7r


    Toyotafanboi wrote: »
    You can do it seperatey but it needs to be pressed into place iirc so it may be cheaper or more practical to do the whole arm.

    Sometimes they are a one shot deal too, press the old one out but the new one has nothing to grab


  • #5
    greasepalm
    Registered Users, Registered Users 2 Posts: 5,444 ✭✭✭greasepalm


    We just replace the arm as got a few ball joints of wrong size and bushings are usually worn also and many inner cv boots on left side are common.


  • #6
    Asmodean
    Registered Users, Registered Users 2 Posts: 1,644 ✭✭✭Asmodean


    Thanks for the replies. Yeah I'll probably just replace the arms altogether for peace of mind as it was a boot failure on one side and worn joint on the other so they're both on the way out I reckon and the bushings are looking a bit tired too.


  • Advertisement
  • #7
    greasepalm
    Registered Users, Registered Users 2 Posts: 5,444 ✭✭✭greasepalm


    Those arms can be a bastard with access to those 2 bolts under the drive shaft with limited access with drive shaft above it,as one nearly needs the drive shaft moved to one side to get your socket on those bolts.


  • #8
    turbostan
    Registered Users, Registered Users 2 Posts: 216 ✭✭turbostan


    Expensive way to do it imo, garages are replacing those ball joints every day of the week,


Advertisement