Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Brake & Gear Cables

  • 22-10-2012 3:15pm
    #1
    goose06
    Registered Users, Registered Users 2 Posts: 744 ✭✭✭


    How often should brake & gear cables be changed or do they even need to be changed unless they are showing signs of wear?


Comments

  • #2
    mp31
    Registered Users, Registered Users 2 Posts: 816 ✭✭✭mp31


    goose06 wrote: »
    How often should brake & gear cables be changed or do they even need to be changed unless they are showing signs of wear?

    I'd say if the gears and brakes are working well then leave the cables alone and just ride the bike ;)


  • #3
    Run_to_da_hills
    Closed Accounts Posts: 20,009 ✭✭✭✭Run_to_da_hills


    I would replace them if the cables or guides get anyway kinked or damaged.

    Nothing worse than a sluggish gear change or irresponsible spongy brakes.


  • #4
    el Bastardo
    Closed Accounts Posts: 573 ✭✭✭el Bastardo


    goose06 wrote: »
    How often should brake & gear cables be changed or do they even need to be changed unless they are showing signs of wear?

    AS often as required really. I replace gear cables when they start fraying or when shifting goes to sh!t. I don't think I've ever needed to replace a brake cable.


  • #5
    victorcarrera
    Registered Users, Registered Users 2 Posts: 1,059 ✭✭✭victorcarrera


    I can't remember ever having to change a brake cable on a road bike but most of my cycling is done on the flat. MTB or urban cycling might be more severe on brake cables.
    Rear mech cable inners are a lighter guage than brake cables, get more use and generally fray at the bend in the shifter, rust at the bottom bracket or stick in the short outer cable at the rear mech. A quick cleaning with solvent will usually fix this. If upshifting can't be trimmed with the normal adjustments it is usually the cable inner needs cleaning or changing. I have had rear mech inner cables break at the shifter after as little as 4,000 km but they are not expensive to replace.


Advertisement