Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Touching Up Dings on MDF Veneer (Primed White) Doors

  • 26-08-2011 8:48am
    #1
    BMD
    Registered Users Posts: 146 ✭✭


    Hi,

    I recently bought some engineered doors for a new build. I'm not entirely satisfied with them as I only realize now that the veneer is MDF. During the hanging of the doors a few of them have got slight dings/scrapes revealing the MDF underneath the paint.

    I want to know how I can touch these up. I will be putting a final coat of white paint on the doors but want to address the dings before doing this. Is there some type of filler I can put on MDF and then sand down?


Comments

  • #2
    galwaydude18
    Registered Users, Registered Users 2 Posts: 3,695 ✭✭✭galwaydude18


    BMD wrote: »
    Hi,

    I recently bought some engineered doors for a new build. I'm not entirely satisfied with them as I only realize now that the veneer is MDF. During the hanging of the doors a few of them have got slight dings/scrapes revealing the MDF underneath the paint.

    I want to know how I can touch these up. I will be putting a final coat of white paint on the doors but want to address the dings before doing this. Is there some type of filler I can put on MDF and then sand down?


    I would use isoprol filler. It comes in two parts the filler and a hardener. You mix a golf ball size of filler to a pea size if hardener and mix it thoroughly. You need to apply it quickly as it starts to harden within a few minutes. Once it has hardened on the doors sand it off and your ready to paint


  • #3
    cardwizzard
    Registered Users, Registered Users 2 Posts: 1,385 ✭✭✭cardwizzard


    Yeah a pack filler is probably the bst, isopon tc, If not try a brand called Tourpret. Pretty good stuff. Also as the saying goes, always reprime the preprime. That stuff is useless.


Advertisement