Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Repairing cut cable on hedge trimmer

  • 17-05-2021 3:27pm
    #1
    [Deleted User]
    Posts: 0 ✭


    I cut through the cabel of this hedge trimmer


    I cut about two feet from the machine, Can i put a plug on it and use an extension. It was in an extension anyway similar to https://www.hilltop-products.co.uk/6-way-extension-lead.html


    I just notice the extension says total load must not exced 13 amp?



    The fuse in the hall tripped.It was plugged in where the router is usually plugged and that fuse tripped. It wasn't the ECLB trip switch itself is that unusual?


Comments

  • #2
    Phil.x
    Registered Users, Registered Users 2 Posts: 1,746 ✭✭✭Phil.x


    sugarman wrote: »
    Just wire one of these onto where you cut through it.

    PL0947406-40.jpg

    And make sure the brass pin end is connected to the trimmer and not to the longer bit of cable.


  • #3
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    sugarman wrote: »
    Just wire one of these onto where you cut through it.

    PL0947406-40.jpg
    Thanks i read old thread saying these are not safe, or is that a different one?


  • #4
    downtheroad
    Registered Users, Registered Users 2 Posts: 3,276 ✭✭✭downtheroad


    SoulWriter wrote: »
    Thanks i read old thread saying these are not safe, or is that a different one?

    I did exactly this 2 years ago, fixed it with this plug and have had no issues since.


  • #5
    listermint
    Registered Users, Registered Users 2 Posts: 34,105 ✭✭✭✭listermint


    SoulWriter wrote: »
    Thanks i read old thread saying these are not safe, or is that a different one?

    Unsafe specifically why ?


  • #6
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    listermint wrote: »
    Unsafe specifically why ?
    i don't understand it really, other threads warned about connecttors



    example

    https://www.boards.ie/vbulletin/showpost.php?p=107031624&postcount=6


  • Advertisement
  • #7
    listermint
    Registered Users, Registered Users 2 Posts: 34,105 ✭✭✭✭listermint


    SoulWriter wrote: »
    i don't understand it really, other threads warned about connecttors



    example

    https://www.boards.ie/vbulletin/showpost.php?p=107031624&postcount=6

    They were talking about choc block type connectors.

    The connector linked in this thread is fine and also is similar to the type that is on actual devices like Flymo mowers etc. Baring in mine that you have to fit the right connector on the right cable as previously pointed out by poster above.


  • #8
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    listermint wrote: »
    They were talking about choc block type connectors.

    The connector linked in this thread is fine and also is similar to the type that is on actual devices like Flymo mowers etc. Baring in mine that you have to fit the right connector on the right cable as previously pointed out by poster above.
    ok thanks. what is this connector here actually called?
    Found it
    https://cpcireland.farnell.com/pro-elec/0129-bk/connector-rubber-10a-3-pin-black/dp/PL09474
    Rated at 10 amp, is that OK


  • #9
    tDw6u1bj
    Registered Users, Registered Users 2 Posts: 207 ✭✭tDw6u1bj


    I'd rewire it, easiest and neatest option
    open the case, cut off the damaged section and rewire it into the terminals.

    If the cut is near the plug then you can get a replacement lead and wire that in. You can get them off amazon for not much, though I usually cut them off dead garden tools before I bin them.

    (edit. rereading that the cut is beside the machine. 100% just wire it in, 5 minute job and a much better result than having a connector on the wire)


Advertisement