Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

Wet rafters in attic.

Options
  • 25-11-2020 3:54pm
    #1
    Registered Users Posts: 55 ✭✭


    Hi folks,


    I had a large leak onto my ceiling recently.
    Directly below an area with velux window and tile vents in the roof.
    The roofers have been back 3 or 4 times times, trying different things with the velux window & vents. Each time the leaks get gradually better.



    I would say the issue is 99% better now. But I still see small damp patches where the felt is nailed into the rafters when it rains. It only happens in the area below the tile vents.


    I would never have noticed this under normal circumstances.
    Is this normal, acceptable?
    Or can it cause long term damage?


    Cheers.


Comments

  • Registered Users Posts: 33,616 ✭✭✭✭listermint


    The roofers haven't solved the problem. Nails should not be getting wet. That barrier is a last dance safety barrier for water. It looks to be a first barrier for wherever the waters coming from. Could be a cracked tiles. Poorly fitted or sealed vent cover. Multiple things. But needs to be fixed from above


  • Moderators, Society & Culture Moderators Posts: 38,438 Mod ✭✭✭✭Gumbo


    1. You have to try find where the water is getting past the roof tile.
    2. Then that should lead to the nail through the felt.

    Water may be penetrating up higher and rolling down, unless there’s a damaged tile above the nail location.


  • Closed Accounts Posts: 22,651 ✭✭✭✭beauf


    Gumbo wrote: »
    1. You have to try find where the water is getting past the roof tile.
    2. Then that should lead to the nail through the felt.

    Water may be penetrating up higher and rolling down, unless there’s a damaged tile above the nail location.

    Ridge tiles even...


  • Registered Users Posts: 3,466 ✭✭✭jetfiremuck


    Roof leaks are never where they appear. More than likely its way above the roof area where the leak is showing. Could be as far to the ridge tiles as posters mentioned.


  • Moderators, Society & Culture Moderators Posts: 38,438 Mod ✭✭✭✭Gumbo


    beauf wrote: »
    Ridge tiles even...

    Yep could be anything. The bedding joints etc


  • Advertisement
  • Moderators, Home & Garden Moderators Posts: 10,140 Mod ✭✭✭✭BryanF


    Felt I’d too tight. It’s getting stopped by the batten, BUT as other have said solve the leak.

    If there aren’t velux or vents above the point I the picture, then start with the ridge tiles.


  • Registered Users Posts: 55 ✭✭sonny liston


    Roofers came back.
    I'm pretty sure the leak is coming from a tile vent.

    The roofer refitted the tile vent, put some silicone around it. Do these normally need sealing like this?



    He also removed some moss.
    And put some silicone on the ridge tiles for good measure where there were gaps in the cement between the ridge tiles.


    Let's see next time it rains......


  • Moderators, Society & Culture Moderators Posts: 38,438 Mod ✭✭✭✭Gumbo


    Silicone not the best product here. It will shrink over time.


  • Registered Users Posts: 55 ✭✭sonny liston


    Fairly windy and rainy tonight.
    Still seeing some damp patches where the felt is nailed into rafters.
    Only happening below tiles vents.


    Is this acceptable on a night like this?
    I know the roofer is going to push back saying this is normal.


    Cheers.


  • Subscribers Posts: 40,989 ✭✭✭✭sydthebeat


    Looks like an extremely shallow pitched roof, and the reason is being driven back up under the roof finish.

    Battens probably too far apart for pitch as well


  • Advertisement
  • Registered Users Posts: 5,771 ✭✭✭con747


    Fairly windy and rainy tonight.
    Still seeing some damp patches where the felt is nailed into rafters.
    Only happening below tiles vents.


    Is this acceptable on a night like this?
    I know the roofer is going to push back saying this is normal.


    Cheers.

    Any "roofer" who uses silicone to fix gaps in ridge tiles needs to be questioned about his qualifications in my view. That is not normal and needs to be fixed asap by someone who knows what they are doing in my opinion for what it's worth.

    Don't expect anything from life, just be grateful to be alive.



  • Registered Users Posts: 55 ✭✭sonny liston


    Thanks for the feedback.



    I stuck my phone up into the tile vent(not inside the actual tube portion).
    Looks to me like the front of the vent is not flush with the neighbouring tiles and I can see daylight.


    Could this be the problem?


  • Registered Users Posts: 45,820 ✭✭✭✭muffler


    That is most likely the source of your problems


  • Moderators, Society & Culture Moderators Posts: 38,438 Mod ✭✭✭✭Gumbo


    Thanks for the feedback.



    I stuck my phone up into the tile vent(not inside the actual tube portion).
    Looks to me like the front of the vent is not flush with the neighbouring tiles and I can see daylight.


    Could this be the problem?

    Possible light bulb moment there :)

    Fix this and see how it goes.


  • Registered Users Posts: 55 ✭✭sonny liston


    Despite aligning the tile vent correctly with the other tiles, the issue is still there!

    After the heavy rain at the weekend, I now notice damp rafters on the exact opposite side of the roof to the initial damp I noticed.
    I only see damp patches on a width of about 4 rafters, and on opposite sides of the roof apex.
    Would this indicate an issue with the ridge tiles which are common to both?

    Although the damp only appears towards the bottam, away from the ridge.

    Cheers.


  • Subscribers Posts: 40,989 ✭✭✭✭sydthebeat


    Any idea what the pitch is?


  • Registered Users Posts: 55 ✭✭sonny liston


    I'd say about 45 degree pitch. Seems regular enough.


Advertisement