Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Septic Tank Help

  • 08-06-2019 10:23pm
    #1
    vanman99
    Registered Users Posts: 183 ✭✭


    Hi, looking for some guidance. I think I have an aerobic treatment unit, 3 tanks,. Tank 1 is where the crap goes basically, tank 2 is full of little aerobic balls and a lot of water. And then tank 3 is very little water....now tank 1 was full to the brim with water seeping out and the intake pipe full also, tank 2 doesn't seem to change the water level but is full of little plastic balls and a pump and tank 3 very little liquid, some electric cable and what looks like a fuse box. I had tank 1 emptied and de-sludged and tank 3 cleared, couldn't touch tank 2 but I think that's causing my issue with why tank 1 was full..... I've added photos of tank 2 and what it is full of, I have a suspicion these things should be in a bag and that split and is clogging up a pipe but any one any ideas if this is how tank 2 is supposed to look??


Comments

  • #2
    Meningate
    Registered Users, Registered Users 2 Posts: 41 ✭Meningate


    Not a big help, but I've been looking at tanks myself this year and I've not yet seen one with loose plastic. Regarding water levels, once the tanks are full, the levels shouldn't change. As new stuff enters the primary chamber it displaces liquid and light waste into the middle chamber where it's aerated. Incoming into this chamber pushes some water out into the final settlement chamber which in turn displaces liquid into your distribution box and on to your percolation field, the chambers remain full at all times. The distribution box should be accessible somewhere in between tank and field and you will see how much is passing through. Hope you get a more definite answer.


  • #3
    vanman99
    Registered Users Posts: 183 ✭✭vanman99


    So, managed to get the original installer, the baffles should be loose, no idea what the cloth stuff is, maybe the sock from the pipe to stop effluent getting to tank 2 or maybe just a cloth...he reckons pump is gone in tank 1....


  • #4
    Meningate
    Registered Users, Registered Users 2 Posts: 41 ✭Meningate


    Surprised about them being loose, there'd be nothing to stop them going into the next chamber and on into the percolation field. I've looked up several on line and the manufacturers that show a sectional diagram show them all together in one or two blocks although they don't give any sign of what holds them. Can't believe there would be any obstacle ( like a cloth) over the pipes between chambers as that would be most likely to cause a blockage. Could be someone in the Household is using the wc as a bin ��. Anyway, thanks for sharing and I hope you get it sorted ok.


Advertisement