uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Click here to find out more x
Post Reply  
Thread Tools Search this Thread
18-09-2019, 15:57   #1
Registered User
crae's Avatar
Join Date: Oct 2018
Posts: 17
Cutting alarm cable during construction?

Just bought a house with a Europlex alarm and a scopetronic alarm pad.
I’m extending my bathroom and need to cut an alarm cable (that was in the wall I’m moving)

I have no idea who installed this, there are no phone numbers or anything anywhere on it.

Will cutting cable trigger the alarm?
Even if it’s not armed?
Can I extend cable later? What kind of cable usually goes to sensors?

Don’t really care about the alarm right now, if it works or not.
Just don’t want the alarm to constantly go off if it thinks it’s being tampered with.

Any ideas? Suggestions?
crae is offline  
18-09-2019, 16:07   #2
Registered User
loudymacloud's Avatar
Join Date: May 2012
Posts: 332
It could still go off, if you can find where the backup battery pack is stored and disconnect that you can then go ahead and cut the wire.

happened me, bought a house, had a panic button in one of the bedrooms, i thought the thing was disconnected, cut the wire. Alarm goes off

Panic ensued as I hadnt a clue what to do. Found a number on the alarm control panel and some very helpful guy talked me through how to disarm the battery. The box and battery were in the hot press.
loudymacloud is offline  
18-09-2019, 16:37   #3
Registered User
crae's Avatar
Join Date: Oct 2018
Posts: 17
I have a big box in hallway.
I assume that’s where the control board and battery is?

Since I know the code. I’m hoping that will disable alarm if I cut cable and alarm goes off?

Unfortunately I don’t have a number anywhere.
Googled the alarm and get to a phone number i Dublin north. But tried ringing it all day with no response.

Don’t know if this company even exist anymore, it’s probably 15-20 years ago this alarm was installed.
crae is offline  
Post Reply

Quick Reply
Remove Text Formatting

Insert Image
Wrap [QUOTE] tags around selected text
Decrease Size
Increase Size
Please sign up or log in to join the discussion

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Share Tweet