Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

heating Zones not connected to panel

  • 04-07-2020 11:33pm
    #1
    Gilbey
    Registered Users Posts: 82 ✭✭


    hi

    I have 3 motorised valves in my hot press upstairs. 2 thermostats, one downstairs and one upstairs. However my heating will only power on and off. If I want upstairs heating on only I have to turn down a thermostat.

    There is no wiring at the panel/ power switch. Is it a big job to run wires to make my house a 3 zone system. Or can there some new tech or wireless systems out there. House is 2 storey and built in 2007.

    Thanks


Comments

  • #2
    roy rodgers
    Registered Users, Registered Users 2 Posts: 1,492 ✭✭✭roy rodgers


    Gilbey wrote: »
    hi

    I have 3 motorised valves in my hot press upstairs. 2 thermostats, one downstairs and one upstairs. However my heating will only power on and off. If I want upstairs heating on only I have to turn down a thermostat.

    There is no wiring at the panel/ power switch. Is it a big job to run wires to make my house a 3 zone system. Or can there some new tech or wireless systems out there. House is 2 storey and built in 2007.

    Thanks

    It be more cost effective to get cables back to the hot press and install a New 3 channel programmer where the old timer is.
    There is a wireless system that could be installed depending on the house but expected that to cost a bit depending on the house.
    Unfortunately you don't qualify for the heating controls grant as your house was built after 2006.
    It be definitely be worth installing the 3 channel programmer and getting wires back to the hot press.


  • #3
    Gilbey
    Registered Users Posts: 82 ✭✭Gilbey


    roy rodgers wrote: »
    It be more cost effective to get cables back to the hot press and install a New 3 channel programmer where the old timer is.
    There is a wireless system that could be installed depending on the house but expected that to cost a bit depending on the house.
    Unfortunately you don't qualify for the heating controls grant as your house was built after 2006.
    It be definitely be worth installing the 3 channel programmer and getting wires back to the hot press.

    I have power from thermostats to the hot press, because the motorised valves work when i turn down the stats. But don't seem to have enough cables at the point where my controls are . Just think there is 2 or 3 cables isnthat enough?? Or should there be more to connect a 3 zone control.


Advertisement