Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Working with Siberian Larch: long masonry SDS drill bit

  • 07-09-2019 6:20pm
    #1
    Calahonda52
    Registered Users, Registered Users 2 Posts: 12,564 ✭✭✭✭


    Bought some 6 by 1 of the above yesterday to make an outside small stand for a gas plancha.
    Its rough so wonder what kind of a sander would be best to get rid of the burrs.
    I don't need it 100% smooth.
    Am told its pretty good for being left outside all year..
    Any thoughts on it as a timber?
    .
    .
    Need a SDS drill , with a working length of 900mm:
    I have drilled a 700mm 80mm dia hole though a wall, which is 800, hence the question.
    Thanks as always

    “I can’t pay my staff or mortgage with instagram likes”.



Comments

  • #2
    listermint
    Registered Users, Registered Users 2 Posts: 34,104 ✭✭✭✭listermint


    Calahonda52 wrote: »
    Bought some 6 by 1 of the above yesterday to make an outside small stand for a gas plancha.
    Its rough so wonder what kind of a sander would be best to get rid of the burrs.
    I don't need it 100% smooth.
    Am told its pretty good for being left outside all year..
    Any thoughts on it as a timber?
    .
    .
    Need a SDS drill , with a working length of 900mm:
    I have drilled a 700mm 80mm dia hole though a wall, which is 800, hence the question.
    Thanks as always

    Aldi or Lidl have those length drill bits in frequently I've bought mine in there. Grand job.


  • #3
    tabby aspreme
    Registered Users, Registered Users 2 Posts: 4,034 ✭✭✭tabby aspreme


    A half sheet sander, and start with 80 grit sandpaper, work up through the grits till you get the finish you want


  • #4
    my3cents
    Closed Accounts Posts: 9,764 ✭✭✭my3cents


    For sanding put P40 or course grit paper sanding disks in a 115mm angle grinder https://www.amazon.co.uk/115mm-Rubber-Backing-Grinder-Sanding/dp/B0104IVIX0/ as an example. The disks that course will leave marks so you may want to finish with something finer. With a bit of skill you can make the wood look like its been adzed with sanding disks.


Advertisement