If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Lift arm swap

6210SEDave · 2019-05-18 08:24:27

Hi guys I have a John deere 6210se I'm doing a lift arm swap but have come up on a small problem. Down we're the lift armsfit on to the tractor they're are 4 parts that have to be taken off the last bit is stopping me a sleeve that goes on to the load lower link sensor and don't want to heat it in case of doing any damage…

18-05-2019 9:24am

#1

6210SEDave

Registered Users Posts: 4 ✭

Join Date: November 2014

Posts: 1

Hi guys

I have a John deere 6210se I'm doing a lift arm swap but have come up on a small problem. Down we're the lift armsfit on to the tractor they're are 4 parts that have to be taken off the last bit is stopping me a sleeve that goes on to the load lower link sensor and don't want to heat it in case of doing any damage
Can anyone suggest any other was that I might be able to get this part off with out using heat
Thanks in advance

0