Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Removing tiles from plasterboard

  • 18-09-2020 6:00pm
    #1
    awec
    Administrators Posts: 54,105 Admin ✭✭✭✭✭


    We’re considering tiling our kitchen above the countertops and underneath the units. Walls are plasterboard.

    If we go ahead, how much of a bollocks will it be to replace them in future? Will removing them destroy the wall requiring the plasterboard and all the sockets etc to be redone?

    I’m asking cause can’t decide whether to go with someone boring and safe that’ll always look ok, or be more daring with something that may date and we’d want replacing.


Comments

  • #2
    mloc123
    Registered Users, Registered Users 2 Posts: 9,454 ✭✭✭mloc123


    awec wrote: »
    We’re considering tiling our kitchen above the countertops and underneath the units. Walls are plasterboard.

    If we go ahead, how much of a bollocks will it be to replace them in future? Will removing them destroy the wall requiring the plasterboard and all the sockets etc to be redone?

    I’m asking cause can’t decide whether to go with someone boring and safe that’ll always look ok, or be more daring with something that may date and we’d want replacing.

    It is impossible to remove them and retain the plasterboard. I ended up removing the plasterboard fully and reslabbing.... But that isn't a huge job to do.


  • #3
    Dtp1979
    Registered Users, Registered Users 2 Posts: 12,840 ✭✭✭✭Dtp1979


    mloc123 wrote: »
    It is impossible to remove them and retain the plasterboard. I ended up removing the plasterboard fully and reslabbing.... But that isn't a huge job to do.

    +1

    If they’re put on right then the slab will come with it when removing


  • #4
    awec
    Administrators Posts: 54,105 Admin ✭✭✭✭✭awec


    Slabbing? You mean the skim coat?

    My walls aren’t skimmed.


  • #5
    L1011
    Registered Users, Registered Users 2 Posts: 69,581 ✭✭✭✭L1011


    The plasterboard will tear.

    You need to replace the plasterboard.

    Same for floor tiles on plywood (e.g. over a wooden floor), though that's a lot less invasive.


  • #6
    Rows Grower
    Registered Users, Registered Users 2 Posts: 8,373 ✭✭✭Rows Grower


    Just screw some 6mm ply to the slab and tile onto that.

    "Very soon we are going to Mars. You wouldn't have been going to Mars if my opponent won, that I can tell you. You wouldn't even be thinking about it."

    Donald Trump, March 13th 2018.



  • Advertisement
  • #7
    listermint
    Registered Users, Registered Users 2 Posts: 34,106 ✭✭✭✭listermint


    Just cut plasterboard to size.

    Spray plasterboard foam to the back of it. Stick to wall.


    Then tile.

    No mixing to dot and dab no timber. Simple spray stick done.


    Don't get the spray on anything you like though 😉


  • #8
    greasepalm
    Registered Users, Registered Users 2 Posts: 5,475 ✭✭✭greasepalm


    Instead of tiles have you thought about glass splashbacks any colour any pattern as i went for red glass splashback and its wipe clean.


  • #9
    dok_golf
    Registered Users, Registered Users 2 Posts: 1,090 ✭✭✭dok_golf


    Or you can tile over tile but you will need to get longer screws for the sockets


  • #10
    awec
    Administrators Posts: 54,105 Admin ✭✭✭✭✭awec


    Thanks all, to be clear I haven't tiled yet.

    But it sounds like tiling should be considered a pretty permanent option, or at least if they are removed then the wall will need to be fixed, which may be awkward around the kitchen.


  • #11
    listermint
    Registered Users, Registered Users 2 Posts: 34,106 ✭✭✭✭listermint


    awec wrote: »
    Thanks all, to be clear I haven't tiled yet.

    But it sounds like tiling should be considered a pretty permanent option, or at least if they are removed then the wall will need to be fixed, which may be awkward around the kitchen.

    The wall may be fine after tiles are removed. You can't know till it's off tbh. You could end up with a wall with some adhesive left on it. Either way there is options to remedy easily enough.


  • Advertisement
  • #12
    Rows Grower
    Registered Users, Registered Users 2 Posts: 8,373 ✭✭✭Rows Grower


    listermint wrote: »
    The wall may be fine after tiles are removed. You can't know till it's off tbh. You could end up with a wall with some adhesive left on it. Either way there is options to remedy easily enough.

    It will be far from fine if done properly onto bare slabs.

    "Very soon we are going to Mars. You wouldn't have been going to Mars if my opponent won, that I can tell you. You wouldn't even be thinking about it."

    Donald Trump, March 13th 2018.



  • #13
    listermint
    Registered Users, Registered Users 2 Posts: 34,106 ✭✭✭✭listermint


    Rows Grower wrote: »
    It will be far from fine if done properly onto bare slabs.

    We don't know what's under there. We are guessing.

    We also don't know how good a job was done.

    Never equate your own experiences to what you'll find when you start the work ever.

    And remember there's always options when you do uncover.

    It's gas how absolutist people are having only read details of the problem on a message board. Must get all tradespeople to do their quotes on the internet. :p


  • #14
    Rows Grower
    Registered Users, Registered Users 2 Posts: 8,373 ✭✭✭Rows Grower


    listermint wrote: »
    We don't know what's under there. We are guessing.

    We also don't know how good a job was done.

    Never equate your own experiences to what you'll find when you start the work ever.

    And remember there's always options when you do uncover.

    It's gas how absolutist people are having only read details of the problem on a message board. Must get all tradespeople to do their quotes on the internet. :p

    What are you on about you absolute clown, would you ever read the thread before you go off on one your lectures.

    "Very soon we are going to Mars. You wouldn't have been going to Mars if my opponent won, that I can tell you. You wouldn't even be thinking about it."

    Donald Trump, March 13th 2018.



  • #15
    jmBuildExt
    Registered Users, Registered Users 2 Posts: 692 ✭✭✭jmBuildExt


    awec wrote: »
    We’re considering tiling our kitchen above the countertops and underneath the units. Walls are plasterboard.
    Literally the first sentence :D

    I've tiled onto plywood good few times and never had an issue - only thing with that is; for me, i'd want a good few screws in it to keep it stable - which also wont leave your wall in a great state should you want to take it own.... And you'd have to find them all afterwards.

    +1 on the glass coloured splash back. For cheaper alternative you can get acrylic ones... but difference is noticeable between that and glass.

    If you tile straight on and want to take them down again, at the very least you will need to skim the wall after - if you're lucky

    Tiling's for life not just for christmas :)


  • #16
    listermint
    Registered Users, Registered Users 2 Posts: 34,106 ✭✭✭✭listermint


    Rows Grower wrote: »
    What are you on about you absolute clown, would you ever read the thread before you go off on one your lectures.

    Id write a witty retort to your moronic name calling but il leave you to such childish endeavours 'big man'

    you wrote

    It will be far from fine if done properly onto bare slabs.


    I replied, We have no idea what its like underneath until he takes it off. So you making statements like it will be far from fine without lifting a tile is a stated above - moronic.

    As for lectures. Na buddy il leave that to you.


  • #17
    awec
    Administrators Posts: 54,105 Admin ✭✭✭✭✭awec


    jmBuildExt wrote: »
    Literally the first sentence :D

    I've tiled onto plywood good few times and never had an issue - only thing with that is; for me, i'd want a good few screws in it to keep it stable - which also wont leave your wall in a great state should you want to take it own.... And you'd have to find them all afterwards.

    +1 on the glass coloured splash back. For cheaper alternative you can get acrylic ones... but difference is noticeable between that and glass.

    If you tile straight on and want to take them down again, at the very least you will need to skim the wall after - if you're lucky

    Tiling's for life not just for christmas :)

    Yea this is what I'm thinking. Either we pick tiles that we think won't date, or we accept that we'll probably have to skim afterward, or we need to replace the plasterboard where the tiles were.

    Not sure how big a job replacing the plasterboard would be, the current boards obviously go behind the kitchen units, so may be awkward. There's also 1 window area involved.

    Thanks all for the input.


  • #18
    Dr_Colossus
    Registered Users, Registered Users 2 Posts: 3,162 ✭✭✭Dr_Colossus


    I’m presuming this is an existing kitchen with the considered space currently painted.
    If the wall composition currently is plasterboard one suggestion is to cut around the desired area with a multitool. Will make future removal very easy and whole tiled area could be pulled off without any damage to existing board behind countertop or units. If plasterboard is currently dot/dabbed to wall you could pull it off and reslab as there will likely be large voids behind the small area to be tiled, if plasterboard is screwed to a partition you equally pull it off and add additional noggins around permitted to strengthen.
    You'll have to key the painted wall anyway for the adhesive to properly bind so no harm starting with flesh plasterboard, you can buy small 1.2m x 0.6m sheets instead of the usual 2.4m x 1.2m


  • #19
    chooseusername
    Registered Users, Registered Users 2 Posts: 3,879 ✭✭✭chooseusername


    awec wrote: »
    Yea this is what I'm thinking. Either we pick tiles that we think won't date, or we accept that we'll probably have to skim afterward, or we need to replace the plasterboard where the tiles were.

    Not sure how big a job replacing the plasterboard would be, the current boards obviously go behind the kitchen units, so may be awkward. There's also 1 window area involved.

    Thanks all for the input.

    Tile onto the plasterboard as it is now,
    If and when you decide to remove the tiles down the line,
    just refer back to this thread, all the answers are here.
    Some posters are assuming you're worried about removing tiles
    from plasterboard now, as opposed to sometime in the future, when redecorating.


Advertisement