Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Whirlpool Dishwasher

  • 19-04-2013 10:50pm
    #1
    Emmett1
    Registered Users Posts: 34 ✭


    Hi Folks

    I have a whirlpool dishwasher. Its six years old to be honest never given any problems until now. When the wash cycle is finished, it continues to beep. It does not stop until you turn it off.

    Anyone got ant ideas.

    Cheers
    Emmett


Comments

  • #2
    [Deleted User]
    Posts: 31,118 ✭✭✭✭ [Deleted User]


    Check the drain hose, it may not be emptying. Is there water left in the bottom after the wash cycle?


  • #3
    Emmett1
    Registered Users Posts: 34 ✭Emmett1


    Hi Dolan

    No there is no water left in the bottom after the cycle. The dishes dont be dry. It starts beeping at the end of the cycle when its on the rinse.


  • #4
    [Deleted User]
    Posts: 31,118 ✭✭✭✭ [Deleted User]


    Maybe the sensor that detects the system has drained is faulty and the dishwasher "thinks" it is still full of water and stops.


  • #5
    [Deleted User]
    Posts: 31,118 ✭✭✭✭ [Deleted User]


    Check out this site for a list of error codes to narrow down what the fault is. http://www.ukwhitegoods.co.uk/help/fix-it-yourself/fault-codes/dishwasher-fault-codes/3105-whirlpool-generic-dishwasher-fault-codes.html


  • #6
    The Red Ace
    Registered Users, Registered Users 2 Posts: 1,377 ✭✭✭The Red Ace


    If you say the dishes are coming out wet i would suspect that it is not heating, you can check by opening the door during the wash and see if it is getting hot, if its not heating you will need a meter to check the heater element for continuity, also check the position of the spray arms that they are moving as the circulation pumps in these are prone to wear


  • Advertisement
  • #7
    ellewood
    Registered Users, Registered Users 2 Posts: 950 ✭✭✭ellewood


    The Red Ace wrote: »
    If you say the dishes are coming out wet i would suspect that it is not heating, you can check by opening the door during the wash and see if it is getting hot, if its not heating you will need a meter to check the heater element for continuity, also check the position of the spray arms that they are moving as the circulation pumps in these are prone to wear

    its probably just the ntc


Advertisement