Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

2inch braided heavy duty water hose

  • 20-04-2019 10:38pm
    #1
    Registered Users, Registered Users 2 Posts: 351 ✭✭


    anyone recently source good quailty 2inch braided rubber hose. type you would connect up to the vacuum tank to wash down with.not the lay flat type as had it here in the past and wasn't up to the job.

    want about 16 meters of it. if it can be got.


Comments

  • Registered Users, Registered Users 2 Posts: 4,232 ✭✭✭orm0nd


    Nobbies wrote: »
    anyone recently source good quailty 2inch braided rubber hose. type you would connect up to the vacuum tank to wash down with.not the lay flat type as had it here in the past and wasn't up to the job.

    want about 16 meters of it. if it can be got.

    https://jebbtools.ie/products/2-suction-hose-10m-super-strength

    https://www.dhfarmmachinery.com/products/id-101192.html?name=slurry+hose&type=combined&page=4


  • Registered Users, Registered Users 2 Posts: 18,617 ✭✭✭✭_Brian


    How about the small slurry tank hose suitable for emptying septic tank, any good value in them about ??


  • Moderators, Society & Culture Moderators Posts: 12,696 Mod ✭✭✭✭blue5000


    Some of the vac tank manufacturers should have it in stock, 2in is a bit small though, it will block easily unless you are going to use it for clean water.

    If the seat's wet, sit on yer hat, a cool head is better than a wet ar5e.



  • Registered Users, Registered Users 2 Posts: 5,163 ✭✭✭zetecescort


    dealers who do sprayers and sprayer testing might have something too. 50mm a popular size afaik


  • Registered Users Posts: 1,847 ✭✭✭Brown Podzol


    Got a good length of hose from the man delivering the diesel here foc. Apparently if damage/wear is spotted on any part of the hose all of it is replaced. The rest of it is usually in good condition. Might not be 2” but 1.5” anyway.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 7,920 ✭✭✭freedominacup


    blue5000 wrote: »
    Some of the vac tank manufacturers should have it in stock, 2in is a bit small though, it will block easily unless you are going to use it for clean water.

    You need to be careful pumping with it. Easy enough to damage vac pump. Blew 2 sets of vanes here last summer using it to try to clear the back of a long narrow slatted tank. Pressure builds and release valve can't let enough pressure of. Even on tick over engine revs.


  • Moderators, Society & Culture Moderators Posts: 12,696 Mod ✭✭✭✭blue5000


    You need to be careful pumping with it. Easy enough to damage vac pump. Blew 2 sets of vanes here last summer using it to try to clear the back of a long narrow slatted tank. Pressure builds and release valve can't let enough pressure of. Even on tick over engine revs.

    I have 10m of 4 inch, if I'm dumping a load I just put the pump in neutral and let it empty by gravity, thanks didn't know it can wreck the vanes.

    If the seat's wet, sit on yer hat, a cool head is better than a wet ar5e.



Advertisement