Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Cabinet drawer mechanism alternative

  • 14-03-2019 11:08pm
    #1
    seannash
    Registered Users, Registered Users 2 Posts: 5,672 ✭✭✭


    Apologies for the title but I can't describe it any other way.
    So I'm retrofitting a TV unit into a bathroom vanity. I've cut out the drawers to accommodate the plumbing but because of this the drawer come off the runner too a little bit too early.
    So I'm thinking of installing a runner on the bottom of the drawer.
    My question is will this work and has anyone done it before. If so any advice

    Pictures attached for clarity


Comments

  • #2
    Esel
    Registered Users, Registered Users 2 Posts: 22,505 ✭✭✭✭Esel


    No pictures.

    Not your ornery onager



  • #3
    seannash
    Registered Users, Registered Users 2 Posts: 5,672 ✭✭✭seannash


    Pictures below


  • #4
    tabby aspreme
    Registered Users, Registered Users 2 Posts: 4,035 ✭✭✭tabby aspreme


    What you need are underside drawer runners, you may have to fit a different base to the drawers or reduce the height of the drawers for them to fit


  • #5
    seannash
    Registered Users, Registered Users 2 Posts: 5,672 ✭✭✭seannash


    tabby aspreme wrote: »
    What you need are underside drawer runners, you may have to fit a different base to the drawers or reduce the height of the drawers for them to fit

    Thanks,
    Yeah the bottom of the drawer is only backing board but I do have a half inch gap to work with.
    Another thought I had was to install a small spring mounted caster.


Advertisement