Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Rear Shock setup

  • 30-10-2019 5:22pm
    #1
    nelly17
    Registered Users, Registered Users 2 Posts: 1,210 ✭✭✭


    Hi I'm hoping someone might have some info for me on my rear shock. It seems to be allowing too much movement when set to climb.

    its a fox Float x ctd - it seems like when its in climb mode its allowing way too much travel and sapping more energy than it should on the climbs.

    I have upped the air and have slowed down the rebound but it seems like theres too much sag for what should essentially be almost locked out.

    any ideas?


Comments

  • #2
    iwillhtfu
    Registered Users, Registered Users 2 Posts: 6,373 ✭✭✭iwillhtfu


    nelly17 wrote: »
    Hi I'm hoping someone might have some info for me on my rear shock. It seems to be allowing too much movement when set to climb.

    its a fox Float x ctd - it seems like when its in climb mode its allowing way too much travel and sapping more energy than it should on the climbs.

    I have upped the air and have slowed down the rebound but it seems like theres too much sag for what should essentially be almost locked out.

    any ideas?


    It should be pretty much locked out when aired correctly so it may need new seals, when did you have it serviced last? What pressure are you running in it? The rebound will have no impact when climbing.


  • #3
    nelly17
    Registered Users, Registered Users 2 Posts: 1,210 ✭✭✭nelly17


    I got the bike second hand and doubt its been serviced to be honest Im running about 220 psi Im pretty chunky 16 stone. I think I'll get a service done and check it out


  • #4
    iwillhtfu
    Registered Users, Registered Users 2 Posts: 6,373 ✭✭✭iwillhtfu


    I'd say that's a good call.


  • #5
    nelly17
    Registered Users, Registered Users 2 Posts: 1,210 ✭✭✭nelly17


    Cheers


  • #6
    Lemming
    Registered Users, Registered Users 2 Posts: 14,148 ✭✭✭✭Lemming


    nelly17 wrote: »
    I got the bike second hand and doubt its been serviced to be honest Im running about 220 psi Im pretty chunky 16 stone. I think I'll get a service done and check it out

    Besides a service; to set your sag up you'll want to be wearing your typical riding kit. If that involves a backpack with a water bladder and a load of tools, then do just that. You may find you (also) need more than 220psi in your shock.

    But definitely get a service done as iwillhtfu has suggested. My other half's bike was bought 2nd hand and same thing was happening, no matter what we did the sag was just overbearing. Turns out one of the seals was gone.


  • Advertisement
  • #7
    Biopace
    Registered Users Posts: 223 ✭✭Biopace


    Sometimes the seals in the unserviceable part of those Float CTD shocks can go, basically rendering the CTD settings as useless. Fox or a regsitered Fox service centre can fix it, but it is expensive and can take a couple of weeks. It maybe cheaper and quicker to just buy a new shock.


Advertisement