Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

HKC1070 to SABB

  • 29-03-2020 9:41pm
    #1
    med10n
    Registered Users Posts: 6 ✭


    hello,
    would anyone know the reason for this ?. i'm connecting a SABB to a HKC1070 panel. On the SABB manual it says to connect the strobe terminals on the SABB to the Internal Bell terminals on the hkc1070 panel. On the HKC1070 manual, it says to connect the SABB strobe terminals to the strobe terminals on the panel. i assume both are correct but why the difference ?.

    thanks


Comments

  • #2
    altor
    Registered Users, Registered Users 2 Posts: 11,767 ✭✭✭✭altor


    med10n wrote: »
    hello,
    would anyone know the reason for this ?. i'm connecting a SABB to a HKC1070 panel. On the SABB manual it says to connect the strobe terminals on the SABB to the Internal Bell terminals on the hkc1070 panel. On the HKC1070 manual, it says to connect the SABB strobe terminals to the strobe terminals on the panel. i assume both are correct but why the difference ?.

    thanks

    The reason for this is to keep them separate, on the older 8/12 panel both where installed in the internal bell unless you used a separate output for the strobe.
    On the 1070 they added the extra output for this.

    www.altor.ie



  • #3
    med10n
    Registered Users Posts: 6 ✭med10n


    many thanks Altor for the information,

    regards


Advertisement