Colour matching the paint on Ikea Pax doors

leck · 16-08-2018 3:34pm #1

I'm having an Ikea wardrobe installed tomorrow. It will fit into an alcove with a 15 cm gap on one side. My handyman said he'll cover the gap with wood but I'd like to match the paint on that with the wardrobe doors, which are a soft beige.

The doors are FLISBERGET Article no: 003.447.43

https://www.ikea.com/ie/en/products/wardrobes/fitted-wardrobes/flisberget-door-with-hinges-light-beige-spr-39181066/

Anyone know what that is as a Pantone or RAL colour or equivalent?

Glass fused light · 16-08-2018 3:44pm

You are probably better off insetting the wood back a tiny bit and mixing up pollyfil and coating the wood, sand back and paint the same colour as your wall. If you do this make sure that there is sufficient bracing to stop movement at the joint

leck · 16-08-2018 3:54pm

Glass fused light wrote: »

You are probably better off insetting the wood back a tiny bit and mixing up pollyfil and coating the wood, sand back and paint the same colour as your wall. If you do this make sure that there is sufficient bracing to stop movement at the joint

It would be inset a tiny bit anyway as it would be level with the frame and the doors stick out beyond that.

The wall colour happens to be quite close anyway. I should have mathched the wall color (now freshly painted) to the Ikea colour to begin with.

Lex Luthor · 18-08-2018 8:36am

if you go to a place that mixes paint they should have a book of cards with all the RAL range

I got one recently or go into colortrend, they have loads of colors in there on free cards

mmjunenov · 17-10-2019 3:36pm

Hi I am buying the same ikea doors and was wondering did u ever get the colour match?

tcrawford · 17-01-2022 5:14pm

I too am looking to colour match Ikea flisberget. Has anyone had any success?

Colour matching the paint on Ikea Pax doors

Comments