Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Floodlight with sensor safety.

  • 15-11-2019 12:39pm
    #1
    Joe1919
    Registered Users, Registered Users 2 Posts: 1,153 ✭✭✭


    My aunt got her house rewired in 2002 by electrician and all ok except this external floodlight over the front door, which requires frequent attention almost annually (e.g. bulb replacement, unit replacement due to water, corrosion etc). Its a nasty thing really, its located about 8 foot over the door and requires ladder.
    But what I find unsatisfactory from a safety point of view is that it is wired directly to the consumer unit lighting circuit which has no RCD protection on lighting circuits, and there is no separate on/off switch except by switching off the 10 amp mcb. Surly there is an electrocution risk here in changing the lightbulb? Was this the standard in 2002?


Comments

  • #2
    Twister2
    Closed Accounts Posts: 182 ✭✭Twister2


    There should be a switch but I don't thinks it's required by et101

    Rcd not required either


  • #3
    Bruthal
    Closed Accounts Posts: 13,422 ✭✭✭✭Bruthal


    Yea probably no RCD required when its fixed to the building.


  • #4
    keithdub
    Registered Users, Registered Users 2 Posts: 208 ✭✭keithdub


    It would be quite easy to put a switch under the d.b. if that works for you. Then you just have to buy a decent fitting and you shouldn't have to get up there for a while


Advertisement