Photos of your Airsoft equipment.(NO DISCUSSION)

Umarex VFC HK416A5 GBB wearing a quite authentic RAL8000 colour, EoTech XPS holographic sight, LA-5 ATPIAL, Surefire M600 Scout Light (Vampire model) Magpul RVG, Surefire DTS and a Rotex QD suppressor, I put this together to exactly match a weapon used by Naval Special Warfare operators on operation "Neptune Spear"....

Some additions over the past while
Tm G19 with nova Wilson combat style slide and barrel

Tm m4 MWS gbbr with a number of different receiver groups
Mk16 URGI set up

Mk 18

Umarex/VFC HK MP7N (Navy) with TBB, new hop rubber, CNC reinforced nozzle, and upgraded hammer and trigger springs. Outside it has a QD suppressor and Magpul RVG, soon to have an "Aimpoint" T1 on QD mount, mini PAQ10 LLM, and Element M300 mini scout light with VTac (real steel) two point sling.

Just finished upgrading and building this up.... This is my TM KSG bullpup shotgun, apart from the First Factory shell holder and sling point it has a full house of TM shot shells 3X "buckshot" and 2X "slugs" along with two two more "buckshot" held internally in the left spares tube and another in the right feed tube.
I also have a replica Leupold LCO red dot sight co-witnessed to the folding iron sights, and lastly a stubby fore grip.
Internally it has a SAT high performance output valve and triple SAT tight bore barrels and I replaced some 'O' rings that needed it and I Loctite all threaded components so no creaky annoyance. I also have a spare gas tank.

My latest and greatest.... This gun easily matches my previous best in the DSR-1... Here is my Snow Wolf SW-016 (Barrett M98B in .338LM) The real thing is a bolt gun but this model is a V2 AEG inside so very easy to upgrade. 
The selector can flip around to fully automatic too, which is nice... 
New stainless Steel TomTac 650mm TBB which has been stabilised, Prometheus soft hop rubber and nub, SHS 'O' ring CNC nozzle, double 'O' ring "silent" cylinder head and piston head with bearing, polished stainless cylinder, all steel rack piston, Prometheus spring, reshimmed high torque helical gears and lastly a high torque motor.
Shoots nice and straight with .28g out to a respectable range.

you are either gonna love or hate these.
My SRU Prototype collection.

Got my flip caps and put a DOPE sheet inside the ocular lens cap with bullet weight of a .338 LM round and its muzzle velocity with a zero for 300m and come downs to 100m and come ups to 1200m, nice touch of realism.

TM HK416 Delta NGRS maximum upgraded...

Umarex/VFC HK G28 DMR. Prometheus 6.03 TBB, Elvishtac R-Hop.... and plenty more goodies too numerous to mention internally, Crusader G28 QD Suppressor, and of course the only scope that can truly complete this rifle - Kitagawa Kogaku Seizosho replica Schmidt and Bender PM2 DMR optic specifically made for the HK G28....
Aimpoint T1 and LLM-01 are on the way...
And - as it shoots as good as it looks!!

Just finished upgrading the internals on this, Angel Custom power up rocket valve and high flow valve, centered and stabilised Laylax TBB, and a Maple Leaf 50° hop bucking.
Shoots 320FPS and is very satisfyingly on the button at 25 yards.

VFC HK416C with crazy internal upgrades including Titan mosfet, Balystik TBB, Maple Leaf bucking, MAXX cylinder, cylinder head, Titan LiPo battery with mini Deans connectors, real steel HK front and rear sights.... etc etc etc... it shreds.

Hello all. I just got into this Airsoft business a couple of months back. It seemed like a safe, legal, cheap, hassle-free way of getting back into a small bit of shooting, and I'm enjoying messing about immensely. So, to business - this is Terence, the Emotional Support Automatic Rifle:

It is a CYMA-made M4A1 AEG replica and for a little over a hundred squid it's pretty accurate out to about sixty feet after some dialing-in of the sights. It's hefty enough at around 2kg and feels solid and well-made. All the bits of the real rifle appear to be there - the bolt-catch doesn't do anything, including move, but that's to be expected. In terms of accessories, I've got a Theta 40mm red/green dotscope, a folding forward grip and the neatest laser/tactorch combination I could imagine. I've also invested in a second (better) charger, a second (larger-capacity) battery, and three 140-round midcap mags to augment the 300-round hicap that the gun came with, and a much better sling than the utterly sh1t one that was supplied. Happy days! 😁

My TM HK417 NGRS dressed up for DMR role.

Extensive internal upgrades including Prometheus 407mm long 6.03mm TBB, Maple Leaf MR hop with Omega nub, SHS 'O' ring nozzle, Prometheus cylinder head, Prometheus tappet plate, Prometheus cylinder, SHS piston head, Retroarms steel rack piston for NGRS V2, Eagle Six spring, Prometheus spring guide, Ultimate 5.9mm bushings, TM Samarium Cobalt motor (already installed) Prometheus shims, Gate TITAN NGRS rear wired.

Externally it has an Angry Gun Rotex-V QD suppressor with some "carbon fouling" artwork, real steel Heckler and Koch front and rear iron sights, real steel Heckler and Koch front grip, replica Arson Machine wire tidies, remote switch, replica PEQ-15 with internal mod to better hold adjustment of the laser to bore at 55 yards, real steel Heckler and Koch sling point, replica fiber optic illuminated Trijicon ACOG 3.5X35 with QD base and chevron reticle, RMR, killflash ARD, and correct flip caps.

And - it performs as good as it looks.

Updated my M4 with mucho sexier optics: Aim-O ambient light-powered red dot ACOG, in front of a 4x magnifier from the same manufacturer detachable from a flip-to-the-side mount, a flip-down scope protector, and out front an Element PEQ-15 LA-5 red and IR laser and tactorch (excuse the boring kitchen appliances - the bipod is under the bolt-action yoke):

…freeing up the old mini laser/tactorch combo unit to go on this little sweetie:

@Dartz Thanks. It might look a little "busy" from certain angles, but everything on there functions fully and functions well. For the craic, here's my Black Eagle M6 bolt-action complete with bipod and BMS*:

* Big Motherlovin' Scope - 3-9x40 with 12-degree illuminated Traditional Rangefinder reticule, on a 1'' riser. Beautiful eye-relief.