If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Retrofit Back boiler in wood fired stove

backboiler45 · 2020-05-26 09:19:37

I am considering buying a clip in back boiler to insert in existing wood fired stove(for DHW), but looking at the stove there are convection fins at the back of the firebox and also at the rear of the stove. to install the back boiler these would need to be ground down to give an even surface to allow flush connection of…

26-05-2020 10:19am

#1

backboiler45

Registered Users Posts: 1 ✭

Join Date: May 2020

Posts: 0

I am considering buying a clip in back boiler to insert in existing wood fired stove(for DHW), but looking at the stove there are convection fins at the back of the firebox and also at the rear of the stove. to install the back boiler these would need to be ground down to give an even surface to allow flush connection of the pipework,
Has anyone gone to lengths of grinding down cast iron convection fins to install a back boiler?

thanks

0