Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Aritech CS350 - Error 01 Bedroom

  • 16-05-2019 4:49pm
    #1
    amol2229
    Registered Users Posts: 6 ✭


    Hi,

    Recently I moved into a ground floor apartment which has Aritech CS350 alarm installed. I had armed it yesterday night before going to bed and after about an hour or so, I could hear siren inside the apartment. Siren outside was not blowing.

    It showed error code as - "01 Bedroom".

    So, I have disarmed the alarm and not using it any more due to this issue. It's an old apartment about 15 years or so.

    I thought it could be battery in the sensor but upon opening, could not see any battery in the sensor compartment. May be because it's wired or am I looking at the wrong place?

    Seeking your help to rectify the situation.

    Thanks,
    Amol
    Tagged:


Comments

  • #2
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    More than likely a faulty sensor or contact on that zone.


  • #3
    amol2229
    Registered Users Posts: 6 ✭amol2229


    Thankyou KoolKid !

    Would it need just disarming and replacing the sensor with new one or would there be more to it?

    I was checking the forum and saw for some alarm types factory code or something similar is needed. Not sure about CS350.

    Cheers,
    Amol


  • #4
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    In most cases that would do it. If tamper activates your code will disarm the system.


  • #5
    amol2229
    Registered Users Posts: 6 ✭amol2229


    Great. Thanks a lot!

    Will post back after having changed the sensor.


  • #6
    amol2229
    Registered Users Posts: 6 ✭amol2229


    Hi koolKid,

    Currently I have UTC GS613 installed. In case I could not find that sensor, can RK210PT be used to replace the existing one?

    Thanks,
    Amol


  • Advertisement
  • #7
    degsie
    Registered Users, Registered Users 2 Posts: 8,749 ✭✭✭degsie


    amol2229 wrote: »
    Hi koolKid,

    Currently I have UTC GS613 installed. In case I could not find that sensor, can RK210PT be used to replace the existing one?

    Thanks,
    Amol

    Wait, one is a contact sensor but the other is a pir sensor?


  • #8
    amol2229
    Registered Users Posts: 6 ✭amol2229


    Thanks for your response degsie!

    One of the Alarms services' website mentions that they use GS613 and RK210PT and hence thought to check here.

    By the way not able to sourse GS613. Would you know from where to buy the shock sensor GS613?


Advertisement