If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hotpoint integrated Dishwasher LTB 4B019

JumpyJoe · 2020-05-22 19:42:44

Hi Guys looking for some advice, i replaced a water flow heater on my dishwasher and when i switched it back on and selected a cycle it started 4 flashing leds and it bleeps every 6 secs or so for 2 or 3 minute then it started up the cycle but then 2 leds lit up (led 3 and 4). Just wondering does the dishwasher have to be…

Options

22-05-2020 8:42pm

#1

JumpyJoe

Registered Users Posts: 1 ✭

Join Date: May 2020

Posts: 0

Hi Guys looking for some advice, i replaced a water flow heater on my dishwasher and when i switched it back on and selected a cycle it started 4 flashing leds and it bleeps every 6 secs or so for 2 or 3 minute then it started up the cycle but then 2 leds lit up (led 3 and 4). Just wondering does the dishwasher have to be reprogrammed at the pcb board.. before i replaced the component the dishwasher was running but was not heating. Let me know any ideas.

0

Comments

Options
#2 23-05-2020 7:59pm
The Red Ace

Registered Users Posts: 1,376 ✭✭✭

Join Date: February 2013

Posts: 1361

Try by holding the start button for up to 5 seconds to reboot , if that doesn't work unplug it from the mains for a while.

0