Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Repair Roof Tile

  • 17-05-2019 8:50am
    #1
    Slipshaney
    Registered Users Posts: 821 ✭✭✭


    Hi all - I have a corner roof tile that has detached from the cement. Its still intact but I want to repair and reconnect if possible. What do I need for this, and would a normal grout be any good for the job?


Comments

  • #2
    antiskeptic
    Registered Users, Registered Users 2 Posts: 9,555 ✭✭✭antiskeptic


    Mortar 3 parts sand / 2 part cement. You can buy a bag of premix in chaderwicks.

    Chip away the old, loose so that you can get a decent bead of mortar in (10mm thick or more)

    If the cement is loose next tile up then remove under about half that tile length. You don't want to chase your tail the whole way up the roof. If you sort the corner that should be enough


  • #3
    Slipshaney
    Registered Users Posts: 821 ✭✭✭Slipshaney


    Thanks a million for your help
    antiskeptic wrote: »
    Mortar 3 parts sand / 2 part cement. You can buy a bag of premix in chaderwicks.

    Chip away the old, loose so that you can get a decent bead of mortar in (10mm thick or more)

    If the cement is loose next tile up then remove under about half that tile length. You don't want to chase your tail the whole way up the roof. If you sort the corner that should be enough


  • #4
    antiskeptic
    Registered Users, Registered Users 2 Posts: 9,555 ✭✭✭antiskeptic


    Mistake on the mortar miz. It's standard 3:1 which is whats in premix


Advertisement