Bike parts for trade?

NeilMcEoigheann · 29-01-2009 1:36pm

damn it i thought someone was putting up crank set, hmmmmm

Ryder · 01-02-2009 4:54pm

Brand new set of shim 105 brakes. Got from wiggle. Dont fit and want to get rid of them.

blorg · 01-02-2009 5:43pm

Ryder- bear in mind you can send stuff back to Wiggle for a refund if it doesn't fit, you get a very reasonable 40 days to do this.

Ryder · 01-02-2009 7:58pm

Thanks. Stupidly dumped some of the packing. Still...will be a good deal for someone else or spares for my other bike

addict · 07-02-2009 9:35pm

Two sets of new Bontrager Shimano cork brake pads for carbon rims for sale
€25 per set postage included

viperventoux · 17-02-2009 5:56pm

Does anyone have a 9 speed shimano road cassette lying around need one for my turbo HG50 or similar used etc.. I have a used 105 rear mech in decent condition or a new pair of tektro brake callipers in black.

Billy Whizz · 19-02-2009 10:41pm

Have a couple of bits and bobs for trade:

- 90mm and 110mm Deda Quattro stems
- 42cm Van Nicholas anatomic handlebars
- 80mm quill stem
- A Selle Royal saddle

Looking for:
(a) 40cm handlebars (anatomic or traditional)
(b) A few quid to go towards (a) :P

king_of_inismac · 23-02-2009 2:54pm

Hey Guys,

Looking to get new pedals, cleats and shoes for my peugeot bike.

It's just got standard pedals now.

Can anyone help me out?

Thanks,
M

jebidiah · 03-03-2009 12:37am

souter wrote: »

specialities mint 47t, fits sugino zen crankset. May be of interest to any of the new tricross owners.
swap for a 18t cog or charitable donation.

is this still going?

would it fit onto the crank arm from the new langster, that comes with sugino 42 messenger

id be able to make a donation!

NeilMcEoigheann · 04-03-2009 8:11pm

anyone want a pair of these? they have been used for about a week, the middle is pretty much a slick with knobbles on the shoulders.

swap for anything, although any assortment of bike light attachments would be appreciated, but other than that going for free........

KerryCyclist · 06-03-2009 12:24pm

Hi,

I have a pair of Time Impact Pedals in good condition and would consider a trade for a pair of Look Pedals (need to be in reasonably good nick). Please contact me if interested, thanks.

Greyspoke · 06-03-2009 3:47pm

NeilMcEoigheann wrote: »

anyone want a pair of these? they have been used for about a week, the middle is pretty much a slick with knobbles on the shoulders.
swap for anything, although any assortment of bike light attachments would be appreciated, but other than that going for free........

Hi Neil what make/model are they? Size 26x?
I might even have a few light fittings lying around!

NeilMcEoigheann · 06-03-2009 8:30pm

Greyspoke wrote: »

Hi Neil what make/model are they? Size 26x?
I might even have a few light fittings lying around!

they are made by a company called heng shin tire.
and their 26x1.95.
thats great i live in knocklyon. so i can pm you my details or sort something out.

Home:Ballyhoura · 06-03-2009 10:03pm

Home:Ballyhoura wrote: »

Hey guys, I'm looking for an old rear wheel (for 9speed Shimano) to be used on a turbo trainer only. Anything round, with spokes and a shimano fitting will do (preferably straight )...not willing to spend much (if anything at all). That old wheel lying around uselessly in your shed is exactly what I'm looking for! Haha...thanks in advance!

BUMP

liamo333 · 08-03-2009 7:02pm

Looking for an old racer, something in the pegueot type category is ok but will pay good money for something light and with good wheels, for a single speed conversion.

NeilMcEoigheann · 08-03-2009 9:32pm

liamo333 wrote: »

Looking for an old racer, something in the pegueot type category is ok but will pay good money for something light and with good wheels, for a single speed conversion.

i might be able to help you out i'll have to check first though i have 2 bikes but they may have turned into rust even though their in a shed.

liamo333 · 08-03-2009 9:50pm

That's great neil, appreciate it!

Shercobar · 09-03-2009 11:00am

I am also looking for an old racer, so I would be interested if Liamo333 only takes one or if anybody else has a cheap racer to offer .

Greyspoke · 09-03-2009 1:04pm

Hi Neil I think I'll leave those tyres for now - more the problem of arranging to collect them than anything else - if I bump into you in the future and you still have them I might take them then but in the meantime, do what you can to offload them.
Thanks anyway.

cyco · 12-03-2009 5:13pm

Couple of parts to get rid of.

I'm looking for a nice pair of track handlebars- drop bars with the long curve on top to fit a standard stem (not 31.8)
Also looking for a black alloy flat bar standard clamp size, preferably shiny
Also need a 27.2 seatpost (nothing too crap) and saddle (preferably brooks or fizik arione:)

To go-
4 wheels all in working order.

pair of black 700c road wheels complete with 8 speed cassette. quick release but nothing special. €20ono

MTB front wheel. perfectly fine for a regular mtb. it's straight and as smooth as a cheap wheel... €5ono

700c racer front wheel. As good as new but not great. Shiny chrome rim QR. true and smooth. €5ono

Road handlebars. oversize 31.8. One pair of Ritchey in black 44c-c. Others maybe Deda and 40 or 42c-c.(came on a bike and never used them) about €10 each and should have a stem too if needed.

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel. €40

MTB frame. Aluminium Azonic copy. Very small frame for jumping, slalom or whatever. Would go well with the fork above but also comes with a steel rigid fork, fsa orbit headset a seat post and clamp, bb, a derailleur or two. €40

Any half reasonable offer will be accepted especially if you take the lot but a good trade would be better still.

Billy Whizz · 12-03-2009 5:16pm

cyco wrote: »

Couple of parts to get rid of.

I'm looking for a nice pair of track handlebars- drop bars with the long curve on top to fit a standard stem (not 31.8)
Also looking for a black alloy flat bar standard clamp size, preferably shiny
Also need a 27.2 seatpost (nothing too crap) and saddle (preferably brooks or fizik arione:)

To go-
4 wheels all in working order.

pair of black 700c road wheels complete with 8 speed cassette. quick release but nothing special. €20ono

MTB front wheel. perfectly fine for a regular mtb. it's straight and as smooth as a cheap wheel... €5ono

700c racer front wheel. As good as new but not great. Shiny chrome rim QR. true and smooth. €5ono

Road handlebars. oversize 31.8. One pair of Ritchey in black 44c-c. Others maybe Deda and 40 or 42c-c.(came on a bike and never used them) about €10 each and should have a stem too if needed.

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel. €40

MTB frame. Aluminium Azonic copy. Very small frame for jumping, slalom or whatever. Would go well with the fork above but also comes with a steel rigid fork, fsa orbit headset a seat post and clamp, bb, a derailleur or two. €40

Any half reasonable offer will be accepted especially if you take the lot but a good trade would be better still.

Would be interested in the pair of wheels and the Deda handlebars if they are indeed 40cm!

cyco · 12-03-2009 5:19pm

great ill hold onto the wheels for you and check the bars for you later. im in d6 if that suits you for collection? any chance i could offload some more junk?!

Moreofthatjazz · 12-03-2009 6:57pm

any chance i could put my speak in for second refusal on the wheelset/pair black? or even if you had a pair amongst the others? also in d6 so collection no problem...

Home:Ballyhoura · 12-03-2009 6:58pm

cyco wrote: »

great ill hold onto the wheels for you and check the bars for you later. im in d6 if that suits you for collection? any chance i could offload some more junk?!

i'd absolutely love the 700c road wheels too! I've been looking for some for absolutely ages, like at the bottom here!. I'd also love the bars and stem (if 40cm aswell) but the problem is I'm in Limerick. If I'm up there soon and you still have them I'd love to take them off you! Cheers

NeilMcEoigheann · 13-03-2009 4:51am

cyco wrote: »

700c racer front wheel. As good as new but not great. Shiny chrome rim QR. true and smooth. €5ono

yes please could even take it today
PM....

*******

cyco wrote: »

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel. €40

i'll try to get my friend to buy the fork.

xz · 13-03-2009 5:40pm

Anyone got an 8 speed band on front derailleur, preferabally a double sora or tiagra that they they don't need/want anymore?

studiorat · 15-03-2009 3:35pm

cyco wrote: »

Couple of parts to get rid of.

To go-

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel. €40

MTB frame. Aluminium Azonic copy. Very small frame for jumping, slalom or whatever. Would go well with the fork above but also comes with a steel rigid fork, fsa orbit headset a seat post and clamp, bb, a derailleur or two. €40

Would be interested in either of those forks. Send me a PM and we'll make a plan.
Thanks

dave.obrien · 20-03-2009 9:35am

I have a pair of Pro road handlebars, aluminium, oversized, to swap for something. make me an offer! am kind of looking for a new saddle, but all offers would be considered.

also have two old saddles, if anyone would like them, one's a selle royal, perfect condition, that came on my hybrid and one's an old no-name, a bit battered, was on my mountain bike.

JT7 · 20-03-2009 6:44pm

Hey everyone,

I'm looking for a fixed wheel. Just the wheel, not a whole bike.

I have a free wheel on my bike at the moment and I'm looking to trade, sell or buy.

I'm not too sure about measurements so I think it would be better to reply to this, send me an email or text me.

Many thanks! JT
jdtgeezer@hotmail.com
087 126 2588

bcmf · 20-03-2009 9:59pm

I have an L shape stem (100mm) and bars (400mm I think) in silver/steel to match.In perfect shape.ITM

JT7 · 21-03-2009 10:19pm

I want wheels mate

Karma · 24-03-2009 6:16pm

heya
have 1 maybe 2 sets of tubs(track fixie wheels) looking for a saddle(girls if posible) and some other parts. make me a offer i dont understand.

JT7 · 25-03-2009 4:04pm

cool, um how about swap for a back free wheel? Thats all I have, or I could buy it for 40 euros?

cyco · 25-03-2009 4:56pm

Still most of these parts to get rid of. Couple of interested parties fell through so if anyone is interested the following are up for grabs:

Couple of parts to get rid of.

I'm looking for a nice pair of track handlebars- drop bars with the long curve on top to fit a standard stem (not 31.8)

Also looking for a black alloy flat bar standard clamp size, preferably shiny

need a 27.2 seatpost (nothing too crap) and saddle (preferably brooks or fizik arione

To go-
3 wheels all in working order.

pair of black 700c road wheels complete with 8 speed cassette. quick release but nothing special. €20ono

MTB front wheel. perfectly fine for a regular mtb. it's straight and as smooth as a cheap wheel... any offer

Road handlebars. oversize 31.8 Ritchey black 44c-c.

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel.

MTB frame. Aluminium Azonic copy. Very small frame for jumping, slalom or whatever. Would go well with the fork above but also comes with a steel rigid fork, fsa orbit headset a seat post and clamp, bb, a derailleur or two.

Also bits and pieces like lx brake levers and if interested.

Any half reasonable offer will be accepted especially if you take the lot but a good trade would be better still.

25-03-2009 5:23pm

cyco wrote: »

3 wheels all in working order.

pair of black 700c road wheels complete with 8 speed cassette. quick release but nothing special. €20ono

Also bits and pieces like lx brake levers and if interested.

Any half reasonable offer will be accepted especially if you take the lot but a good trade would be better still.

Would definitely take these as spares off you.

Emmet

cyco · 25-03-2009 5:26pm

emmet2

sounds good! anything to trade? or make me an offer!

Federal · 25-03-2009 6:33pm

Karma wrote: »

heya
have 1 maybe 2 sets of tubs(track fixie wheels) looking for a saddle(girls if posible) and some other parts. make me a offer i dont understand.

I have a nice WTB saddle that you might be interested in. It's in very good condition, about a year old but used very rarely, it has the "love channel" I think they call it but that mightn't be much use for a girl:p, real nice seat though. Very interested in the wheelset, would swap the seat and some cash or I have lots of bits and bobs lying around that may tickle your fancy. About the wheelset, I assume they're just generic hubs? Are they sealed? What rims are they laced to?

Thanks

25-03-2009 7:09pm

cyco wrote: »

emmet2

sounds good! anything to trade? or make me an offer!

I've nothing I'm afraid..

Have 2 racers at home that just need some tlc to get them out on the roads again. The wheels could be all thats needed for the older one to get some life into it.

Will give you your asking price no problem!

Aquos76 · 26-03-2009 10:23pm

I have a sora/tiagra groupset I am looking to sell, I cant seem to get the ad up on adverts at the moment, I keep getting some sort of permission error, hopefully it will be sorted out soon.

The Sora groupset has only done about 600km as I changed over to an Ultegra SL shortly after buying the bike.

The groupset consists of

FRONT BRAKE: Ultralight dual pivot brakes, Teflon pivots, forged alloy w/ cartridge pads
REAR BRAKE: Ultralight dual pivot brakes, Teflon pivots, forged alloy w/ cartridge pads
BRAKE LEVERS: Shimano Sora, 9-speed STI, flight deck compatible
FRONT DERAILLEUR: Shimano Sora, 31.8mm clamp, bottom pull
REAR DERAILLEUR: Shimano Tiagra, long cage
SHIFT LEVERS: Shimano Sora, 9-speed STI, flight deck compatible
CASSETTE: Shimano Tiagra, 9-speed, 11-25t
CHAIN: Shimano HG73, 9-speed
CRANKSET: Shimano Sora
CHAINRINGS: 50 x 39 x 30t
BOTTOM BRACKET: Shimano FC-4500

The groupset came on a Specialized Allez. I have no idea how much I am looking for for the lot, Ideally I would like to leave it go altogether.

The link to the Specialized onlys works with IE for some reason.

Home:Ballyhoura · 26-03-2009 11:15pm

Aquos76 wrote: »

I have a sora/tiagra groupset I am looking to sell.

I have no idea how much I am looking for for the lot

Hey man, I got the exact same groupset on my Trek 1.5 and I am thinking of upgrading to Ultegra SL too! How much did the groupset upgrade cost you? Also, will you let me know how you get on selling this groupset (like how much you get for it) so that I know if it is worth my while my while at all! Cheers

Aquos76 · 27-03-2009 12:07am

Home:Ballyhoura wrote: »

Hey man, I got the exact same groupset on my Trek 1.5 and I am thinking of upgrading to Ultegra SL too! How much did the groupset upgrade cost you? Also, will you let me know how you get on selling this groupset (like how much you get for it) so that I know if it is worth my while my while at all! Cheers

I got the upgrade through a friend of mine in January, He supplied and fitted the full Ultegra SL for just over €500. He owns a bike shop here in Waterford. He certainly done me a very good deal. However Shimano have since put up their prices so I not 100% sure how much it is now.

At present he is putting together my new bike a Dolan Hercules SE with Ultegra SL on that one too. So I guess I will know soon enough how much it has increases.

I really have no idea how much I will get for the sora one though. From looking at ebay, the brake levers are probably the worth the most though.

CheGuedara · 28-03-2009 12:22am

Hey Guys,

Got an 8 speed xt mtb casette here - bought it as part of the kona build i've got going but eBay neglected to tell me it's not 9 speed, d'Oh.

It's brand new and I've a few bits left to source so if anyone's got a new 9 speed LX casette (or equivalent), or lock on grips, or fizik saddle or similar and interested in a swap PM, (make me an offer!) it'll only be gathering dust otherwise

Gavin · 31-03-2009 10:05am

I have three 26" wheels to dispose of

One front complete wheel which is cheap but works fine
One rear wheel, same as above, no block
One front wheel with no cup/cones. Might be handy for a spare rim/spokes.

Free to whomever wants them, or if someone has a 700c 8 speed rear wheel, that would be cool.

edit, totally off topic, I also have a brand new rugby ball I don't want and a usb rocket launcher thing.

cyco · 31-03-2009 11:45am

Gavin, you're welcome to the wheel if you want it- Any chance you have a half decent flat bar?

To go-

black 700c rear road wheel complete with 8 speed cassette. quick release but nothing special.

MTB front wheel. perfectly fine for a regular mtb. it's straight and works

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel. €40?

MTB frame. Aluminium Azonic copy. Very small frame for jumping, slalom or whatever. Would go well with the fork above but also comes with a steel rigid fork, fsa orbit headset a seat post and clamp, bb, a derailleur or two and a few bits and pieces €40?

Also bits and pieces like lx brake levers, dx flat pedals, old spd mtb pedals, 8speed brake/gear combo shifters, an ~50mm standard clamp stem, a 130mm standard clamp stem and other bits and pieces if interested.

Any half reasonable offer will be accepted especially if you take the lot but a good trade would be better still.

I'm looking for a nice pair of track handlebars- drop bars with the long curve on top to fit a standard stem (not 31.8)

Also looking for a mtb flat bar standard clamp size

Ghost Rider · 31-03-2009 11:55am

Hey there. Would that 50mm stem fit on mountain bike bars? The bike is a Specialized Rockhopper FS that my girlfriend rides and currently has to stretch a bit to reach the bars. Would be happy to swap you the existing stem for it - I reckon it's 100-110mm - if it's any use to you...

cyco wrote: »

Gavin, you're welcome to the wheel if you want it- Any chance you have a half decent flat bar?

To go-

black 700c rear road wheel complete with 8 speed cassette. quick release but nothing special.

MTB front wheel. perfectly fine for a regular mtb. it's straight and works

MTB fork. Marzocchi Z1 alloy. They're old but silky smooth and dont leak or anything like that. feature a double disc mount and 4" travel. €40?

MTB frame. Aluminium Azonic copy. Very small frame for jumping, slalom or whatever. Would go well with the fork above but also comes with a steel rigid fork, fsa orbit headset a seat post and clamp, bb, a derailleur or two and a few bits and pieces €40?

Also bits and pieces like lx brake levers, dx flat pedals, old spd mtb pedals, 8speed brake/gear combo shifters, an ~50mm standard clamp stem, a 130mm standard clamp stem and other bits and pieces if interested.

Any half reasonable offer will be accepted especially if you take the lot but a good trade would be better still.

I'm looking for a nice pair of track handlebars- drop bars with the long curve on top to fit a standard stem (not 31.8)

Also looking for a mtb flat bar standard clamp size

Shercobar · 31-03-2009 2:50pm

Cyclo,

Will offer asking for the 700 rear wheel.
I have no good bike parts to offer as I am new to cycling.
Can collect from D6 anytime.

cyco · 31-03-2009 2:54pm

It's yours. Just in time as no reply from Gavin. I'll Pm you my number for collection

Gavin · 31-03-2009 2:58pm

Nuts. Beaten to the post. No flat bar I'm afraid

trinewbie · 01-04-2009 1:50pm

Hi All -

Long shot but Im looking for pretty much a full groupset bits for a new build, would be looking for ultegra or better but would consider 105 if there s anything going

- 10 speed rear mech
- double front mech
- Chainset (53/39 Preferrable)
- BB
- TT base Bar
- TT Bar end shifters
- TT Brake Levers
- Front and rear calipers

What I could trade:

MTB Tyres:
2x specialized pro, 2.1 tyres (Fast rolling, light) (pretty much perfect)
1x Nobby Nic, 1x Racing ralph, both 2.35's i think in good condition.

Other
2 brand new unused fulcrum QR skewers (from R'3's)
1x No name comfy gel saddle
1x RFR prolight seatpost, light Alu, 31.6d

Bike:

Single Speed/ Fixie:Pretty Similar to :

http://cgi.ebay.co.uk/Fantastic-Fixed-Single-speed-bike-AMAZING-PRICE_W0QQitemZ330318850473QQcmdZViewItemQQptZUK_Bikes_GL?hash=item330318850473&_trksid=p3286.c0.m14&_trkparms=72%3A1688|66%3A2|65%3A12|39%3A1|240%3A1318

Except pearl white, with Black deep wheels, gold rear flip flop hub

.....and a nice Flame saddle :eek::eek:

peterk19 · 01-04-2009 2:19pm

trinewbie wrote: »

2 brand new unused fulcrum QR skewers (from R'3's)

How much for these?

Bike parts for trade?

Comments