Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

New back door installed, sensor removed, now can't set alarm.

  • 04-09-2019 8:49pm
    #1
    goob20s
    Registered Users Posts: 138 ✭✭


    We just got new back doors for the house and the sensor was removed when they were installing. The alarm can't be set now. Can I reattach it? Pic included


Comments

  • #2
    Donnacha_
    Registered Users, Registered Users 2 Posts: 34 ✭Donnacha_


    Yes. But you need a magnet on the door as well to close the contact.


  • #3
    goob20s
    Registered Users Posts: 138 ✭✭goob20s


    Donnacha_ wrote: »
    Yes. But you need a magnet on the door as well to close the contact.
    Does this look right. Pic attached. Just don't want to mess up the new door by putting in the wrong spot


  • #4
    Donnacha_
    Registered Users, Registered Users 2 Posts: 34 ✭Donnacha_


    yes


  • #5
    BIGT4464
    Registered Users, Registered Users 2 Posts: 191 ✭✭BIGT4464


    Does it work now? I had the same issue when I changed my front door. taped the magnets together.


  • #6
    goob20s
    Registered Users Posts: 138 ✭✭goob20s


    BIGT4464 wrote: »
    Does it work now? I had the same issue when I changed my front door. taped the magnets together.
    Yeah it works now. Just used that strong tape instead of screwing it on


  • Advertisement
Advertisement