Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Bathroom extractor fan fitting

Options
  • 22-05-2019 2:54pm
    #1
    Pegasus177
    Registered Users Posts: 44 ✭


    Moved into our house last year. Soon realised the main bathroom was suffering damp and mold. So we will obviously need to put in a extractor fan. Problem is.. who do I call? An electrician? Another problem is that the attic above it is converted with a wooden floor laid. Is this going to cause masssive issues? Is there alternatives? How much will it cost? Advice please


Comments

  • Options
    #2
    loyatemu
    Registered Users Posts: 14,790 ✭✭✭✭loyatemu


    I had one fitted last year - got an electrician to do it.

    (it didn't solve the problem)

    alternative to venting through the attic, is to put it in the wall or window. If that's not possible then you're probably looking at a bigger job involving putting ducting between the floors.


  • Options
    #3
    antiskeptic
    Registered Users Posts: 9,555 ✭✭✭antiskeptic


    Pegasus177 wrote: »
    Moved into our house last year. Soon realised the main bathroom was suffering damp and mold. So we will obviously need to put in a extractor fan. Problem is.. who do I call? An electrician? Another problem is that the attic above it is converted with a wooden floor laid. Is this going to cause masssive issues? Is there alternatives? How much will it cost? Advice please

    Fitting the fan is easy enough, as are the electricals to a degree (you'd probably need something on a timer, (which runs the fan for X period, say 20 mins) after the light in the bathroom has been turned off).

    The main problem is ducting. You could locate the fan such that the duct comes up behind or close to the "walls"of your converted attic (presumably you have some vertical slabs connecting sloped ceiling to floor. The ducts can be run out a soffit (if you have one) or out through a special roof tile. Which adds to the work and distances it from the work an electrician would do.

    Difficult. A builder (who can do it all) won't want to know). An electrician will only go so far (and isn't really necessary given the work is simple) Perhaps a decent handyman?


Advertisement