Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Water dripping from valve at back of boiler

  • 21-05-2019 12:08am
    #1
    kaji
    Registered Users, Registered Users 2 Posts: 646 ✭✭✭


    Hi. So I bought a house that's old enough and needs doing up. It has an old Firebird boiler for the central heating. I noticed that the boiler has a valve at the back on one of the pipes and it starts dripping water when the heating is on and for a good few hours after the heating has been turned off. I got a plumber to service the boiler and fix the valve and to be honest, he was completely useless- he came 3 times and each time "discovered" the real reason for the dripping water and pretending to fix it each time.

    So I went with another plumber and he changed some stuff around and I turned on the heating again today and the drip has started again. It's so disheartening.

    Anyway, my question is- should I investigate further or just cut my loses and get a quote for a new boiler (I'd like an outside one) or would I be just throwing money away? The Firebird boiler in the house at the moment looks old enough, I'd say at least 15 years old. Thanks for reading this, any help appreciated.


Comments

  • #2
    John.G
    Registered Users, Registered Users 2 Posts: 3,560 ✭✭✭John.G


    Can you post a photo?.


  • #3
    kaji
    Registered Users, Registered Users 2 Posts: 646 ✭✭✭kaji


    The water is coming out of the 2nd red thing on the top


  • #4
    kaji
    Registered Users, Registered Users 2 Posts: 646 ✭✭✭kaji


    Pic


  • #5
    Wearb
    Moderators, Home & Garden Moderators Posts: 6,304 Mod ✭✭✭✭Wearb


    Do you know if you have a pressurised or open system? Looks like a pressurised, in which case you probably have a discharged or damaged expansion tank.
    Was that pic taken with the system hot?

    Please follow site and charter rules. "Resistance is futile"



  • #6
    JamesM
    Registered Users, Registered Users 2 Posts: 1,775 ✭✭✭JamesM


    The second one from the left is the safety valve. The pressure on the gauge is way up, so it looks as if the diaphragm has gone in the pressure vessel - needs a new vessel - unless the fill is from the mains and it has been left on. Also I would have thought that an on/off valve should not have been fitted before the safety valve.


  • Advertisement
  • #7
    kaji
    Registered Users, Registered Users 2 Posts: 646 ✭✭✭kaji


    Thanks for all the replies. It sounds like both plumbers didn't know what they were doing so. Do you think I should cut my loses and just get a new boiler installed?


  • #8
    John.G
    Registered Users, Registered Users 2 Posts: 3,560 ✭✭✭John.G


    Pressure gauge appears to be reading 2.0 bar, this should change depending on boiler/contents cold/hot, give the base of the pressure gauge (NOT the gauge itself) a "judicious" tap of something to see if it is stuck, the PRV (safety valve) is set at 3 bar so should not lift until this pressure is reached but maybe just leaking, you should also have a (Red) expansion vessel installed somewhere. Ideally, the pressure should be 1 to 1.5 bar with cold boiler & ~ 2.0 to a max of 2.5 bar when hot.
    No, there shouldn't be a isolation v/v fitted before the safety valve.


  • #9
    John.G
    Registered Users, Registered Users 2 Posts: 3,560 ✭✭✭John.G


    kaji wrote: »
    Thanks for all the replies. It sounds like both plumbers didn't know what they were doing so. Do you think I should cut my loses and just get a new boiler installed?

    NO, I would not change the boiler, a competent plumber should be able to deal easily with your problem, if you post your location I'm sure someone on here can suggest one.


Advertisement