Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

4e error on Samsung dish washer - probably inlet valve

  • 15-11-2018 10:33pm
    #1
    worded
    Registered Users, Registered Users 2 Posts: 4,608 ✭✭✭


    SAMSUNG DW-FN320T

    Water feed is good ...

    Looking probable to be inlet valve

    Any idea how much one would cost ?

    Thanks


Comments

  • #2
    The Red Ace
    Registered Users, Registered Users 2 Posts: 1,377 ✭✭✭The Red Ace


    Not familiar with Samsung but try tilting it forward towards the floor when empty, if it sheds any water from underneath try restarting when you stand it upright


  • #3
    worded
    Registered Users, Registered Users 2 Posts: 4,608 ✭✭✭worded


    The Red Ace wrote: »
    Not familiar with Samsung but try tilting it forward towards the floor when empty, if it sheds any water from underneath try restarting when you stand it upright

    Was worth a shot but no - same

    Will empty it fully tomorrow and put it face down on the door

    I suspect the inlet valve from what I’ve read on the www

    Considering replacing it as it’s been a pain over the years


  • #4
    worded
    Registered Users, Registered Users 2 Posts: 4,608 ✭✭✭worded


    Need to find the part number to determine if a repair is a runner

    Service manual
    https://www.ebay.co.uk/itm/Samsung-DW-FN320T-FN320W-Dishwasher-Service-Manual-Repair-Guide-/232626318860


  • #5
    The Red Ace
    Registered Users, Registered Users 2 Posts: 1,377 ✭✭✭The Red Ace


    worded wrote: »
    Need to find the part number to determine if a repair is a runner

    Service manual
    https://www.ebay.co.uk/itm/Samsung-DW-FN320T-FN320W-Dishwasher-Service-Manual-Repair-Guide-/232626318860

    the valve will be inline or angled at 90, ideally you should remove the current one and test with a meter, check the L and N back to the bottom of the door edge as sometimes the leads become brittle and break there from constant opening and closing of the door


  • #6
    worded
    Registered Users, Registered Users 2 Posts: 4,608 ✭✭✭worded


    The machine is 5 years old and gave a fair bit I’d trouble so I’ve to replace it

    Thanks anyway


  • Advertisement
Advertisement