Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

GBS8220 and JAMMA Mod Issues

  • 17-08-2019 7:12pm
    #1
    KevW24601
    Banned (with Prison Access) Posts: 80 ✭✭


    Hi everyone,


    So recently I've gotten around to modding my Arcade1Up cabinet to a JAMMA Cab. With it I have Pandora's Box 6 and Tekken 2 arcade boards.


    However, I've fallen into a snag with getting video output.


    I am using the stock Arcade1Up monitor (M170ETN01.1) with the same LCD controller board used by ETA Prime. The PB6 works fine when I connect the HDMI and VGA straight to this controller board.

    I also have the CGA to VGA Converter board (GBS8220) that I need to get the JAMMA video signal from the Tekken 2 to output on the monitor. This is where the problem starts (I have the 8220 connected straight to the 5v + Ground connections on the JAMMA PSU).


    When I turn it on, I briefly get the Chinese characters that shows that the 8220 is powered but this is followed by either a "No Signal" message or else a fuzzy (or clear solid) green screen. Same happens when I connect the PB6 this way. Both boards work fine in every other way in that the sound and controls are all functional.


    I tried hooking it up to my neighbour's PC monitor as well to see if it was an issue with the stock monitor but this did not fix the problem.


    Would anyone have any ideas on how to rectify this? Would be very much appreciated.


Comments

  • #2
    KevW24601
    Banned (with Prison Access) Posts: 80 ✭✭KevW24601


    I'm just bumping the post as I have images here to better show the problem.




    GBS-8220 plugged in:


    GBS8220-setup.jpg




    Everything powered on:


    Gbs8220-setup-2-chinese-letters.jpg




    The green screen of doom that follows:


    GBS8220-setup-3-green-screen.jpg


  • #3
    [Deleted User]
    Posts: 7,499 ✭✭✭ [Deleted User]


    Have you got a known working jamma pcb?


  • #4
    KevW24601
    Banned (with Prison Access) Posts: 80 ✭✭KevW24601


    BrownFinger wrote: »
    Have you got a known working jamma pcb?

    I have the Pandora's Box 6 JAMMA board and Tekken 2.

    PB6 works fine when I plug the VGA straight from that board to the LCD controller board at the back of the monitor. If I use the GBS, I get the green screen.

    Tekken 2 works fine in every other way sans the GBS giving me the green screen. I've been told those GBS converter boards are very fickle.


  • #5
    beejee
    Registered Users, Registered Users 2 Posts: 1,787 ✭✭✭beejee


    It might be something to do with the lcd controller not being correctly "flashed" for your particular lcd monitor?

    https://www.reddit.com/r/Arcade1Up/comments/aaqaxc/issue_with_modding_possibly_the_lcd_controller/

    Reading over that thread, I'd be very careful about nuking your monitor!


  • #6
    KevW24601
    Banned (with Prison Access) Posts: 80 ✭✭KevW24601


    beejee wrote: »
    It might be something to do with the lcd controller not being correctly "flashed" for your particular lcd monitor?

    https://www.reddit.com/r/Arcade1Up/comments/aaqaxc/issue_with_modding_possibly_the_lcd_controller/

    Reading over that thread, I'd be very careful about nuking your monitor!

    This was the LCD Controller board I bought:

    https://www.amazon.co.uk/gp/aw/d/B07JMLRJN1?psc=1&ref=ppx_pop_mob_b_asin_image

    As I was saying, it works not a bother when I connect the PB6 straight in to the controller board via the VGA or HDMI ports, as shown here:

    68744032-668850950296059-8480374949851168768-n.jpg

    The green screen only happens when I specifically try to use the GBS converter to take video signal from the JAMMA harness to VGA.

    As I also said, I tried hooking it up to my neighbour's Dell PC monitor because my first impression was it could have been an issue with the stock monitor or the controller board. But the Dell monitor also gave that same green screen.


  • Advertisement
  • #7
    KevW24601
    Banned (with Prison Access) Posts: 80 ✭✭KevW24601


    Just bumping again to say everything is sorted.

    I got a replacement converter board this morning and works like a charm. That other converter board I got was faulty.


Advertisement