Fox service

Feidhlim Dignan · 01-07-2019 1:54pm #1

Looking at getting my shock and fork serviced, where is good to get it done? And how much does it cost roughly?

Thanks

crosswords · 01-07-2019 2:40pm

https://www.tftuned.com/servicing/10-fox-forks

C3PO · 01-07-2019 3:29pm

Expert Cycles Rathfarnham

Wanderer78 · 02-07-2019 6:49am

Got tf to do a dropper last year, done a good job, but it has died a death, nothing to do with tf, they warned me of it, thankfully my lbs now services shocks and droppers etc, south east if its any good to you op?

Tenzor07 · 02-07-2019 9:47am

C3PO wrote: »

Expert Cycles Rathfarnham

As C3PO says, Expert cycles, the head mechanic Robin is a whizz with shox...

fatbhoy · 11-07-2019 9:26am

Genuine question: for a service, why would anyone post their forks/shock over to TF Tuning in the UK when postage is £30? Why not get a service done here?

steamsey · 11-07-2019 10:25am

fatbhoy wrote: »

Genuine question: for a service, why would anyone post their forks/shock over to TF Tuning in the UK when postage is £30? Why not get a service done here?

I'd say it's people who live no where near a bike shop that can do suspension or maybe someone wants a specific upgrade that TF can do.

Anyone teach themselves to do their own suspension? Along with frame bearings, I've been meaning to give it a go.

Wanderer78 · 11-07-2019 11:36am

fatbhoy wrote:

Genuine question: for a service, why would anyone post their forks/shock over to TF Tuning in the UK when postage is Â£30? Why not get a service done here?

I would have had to travel a bit to get services done, as none of my lbs's were willing or able to do so, they all sent them to the UK for this. One of my lbs's only charged me tk's charge, so no gain for themselves

Biopace · 11-07-2019 11:45am

This may depend on the age of your bike, but I recently went about getting my rear Fox Shock serviced with TF for my 2017 bike, turned out it was cheaper and quicker to buy a new (old stock) shock on CRC.

steamsey · 11-07-2019 11:53am

Might give the shock a go - this article makes it sounds very easy

https://www.mbr.co.uk/mountain-bike-videos/workshop/service-fox-float-air-can-video-321871

They reckon 30 mins work.

They say to do it every 7 or 8 weeks!!!!! Jaysus. I'm about 60 weeks since mine was serviced.

Wanderer78 · 11-07-2019 12:30pm

Biopace wrote:

This may depend on the age of your bike, but I recently went about getting my rear Fox Shock serviced with TF for my 2017 bike, turned out it was cheaper and quicker to buy a new (old stock) shock on CRC.

Yea its not cheap, I should have just bought a new dropper, but it annoys me when stuff can be fixed or serviced, without the need to be replaced

prunudo · 11-07-2019 12:57pm

Wanderer78 wrote: »

Yea its not cheap, I should have just bought a new dropper, but it annoys me when stuff can be fixed or serviced, without the need to be replaced

Maybe not for shocks or forks but when you see the price of some droppers its hard not buy new vs the price of repair and having to bring back to a shop if there isn't one near by.

kirving · 11-07-2019 5:06pm

Serviced my Fox 34 Rhythm recently.

You do have to be careful and a little bit creative when it comes to disassembly and reassembly without the exact right tools, but not too hard a job at all for a DIYer.

One thing I would say for the fork, is be careful not to coat the damper shaft in oil when re-assembling. ie: swift it in slowly and use a tube on the syringe.

There is no actual feature to stop the shaft spinning inside the fork housing as you tighten the on the outside nut, so it requires just the friction of the shaft against the housing to hold the shift in place. Oil here is not your friend.

saccades · 11-07-2019 9:31pm

fatbhoy wrote: »

Genuine question: for a service, why would anyone post their forks/shock over to TF Tuning in the UK when postage is £30? Why not get a service done here?

They were the dtswiss service agent for UK/Ireland so no choice for a warranty repair. Also the last place to do spv rear shocks

iwillhtfu · 11-07-2019 9:59pm

You could service a shock yourself no bother its just a few seals and O rings you can get a pack to suit your shock.

I'm not sure about the fork but I'm sure with a bit of research it wouldn't be to difficult.

FirstinLastout · 14-07-2019 11:34pm

Do it yerself, easy job!

Tenzor07 · 15-07-2019 10:28am

FirstinLastout wrote: »

Do it yerself, easy job!

I'd give it a bash meself if it were older forks, not in warranty...a few oul youtube videos and will be grand...

But for newer forks costing around €1000 still in warranty, I would leave it to the professionals...

steamsey · 15-07-2019 10:30am

FirstinLastout wrote: »

Do it yerself, easy job!

I've the seals and oil in the post for my shock. Cost €30 quid. Been meaning to try it for years. If that goes well, I'll look at the forks.

iwillhtfu · 15-07-2019 1:17pm

steamsey wrote: »

I've the seals and oil in the post for my shock. Cost €30 quid. Been meaning to try it for years. If that goes well, I'll look at the forks.

It couldn't easier no more than a 30min job but be sure to let the air out of it before you go unscrewing the thing

Wanderer78 · 15-07-2019 3:08pm

steamsey wrote:

I've the seals and oil in the post for my shock. Cost â‚¬30 quid. Been meaning to try it for years. If that goes well, I'll look at the forks.

Where did you get the bits and bobs?

steamsey · 15-07-2019 3:14pm

Wanderer78 wrote: »

Where did you get the bits and bobs?

https://www.bike-components.de/en/Fox-Racing-Shox/Float-Line-Air-Sleeve-Rebuild-Kit-p20050/

Did a bit of googling and found this kit should do my shock which is a Fox Float X DPS Factory. It does say that this kit does all Fox Shocks since 2000 so that's handy.

I was going to just get the oil and do a clean and re-oil but it's been a year at least since that shock saw any love so I decided to just do all the seals when I'm at it

steamsey · 15-07-2019 4:06pm

Official FOX video for servicing Float shocks is here - https://www.ridefox.com/fox17/help.php?m=bike&id=570

I'll prob use this vid when I do it though - https://www.mbr.co.uk/mountain-bike-videos/workshop/service-fox-float-air-can-video-321871

Gerry · 15-07-2019 11:04pm

In terms of shops I'd use expert, I'm sure there are others also. As mentioned after postage you are going to be saving money and keeping the business in ireland. However they do not service fox pull shocks which the jekyll I had borrowed had.. so i sent that to silver fish.

I did with help from a friend service a fox 32 years ago and more recently did a full uppers and lowers on the pike. Sram provide a very detailed full service manual ( I think fox do also )
It took a bit of time but was a satisfying project. You need to be somewhat mechanically minded and patient. Of course as with anything if you were to do them regularly youd get much quicker
There wasnt any particular special tool needed and no clamping in a vice which I remember from the fox service.

In short I think lowers on the fork and air can on the shock is doable for most folks and those are the more frequent services needed anyways

steamsey · 22-07-2019 10:42am

Did the rear shock air can service over the weekend.

Was very easy. Was always slightly afraid to go near suspension in case I messed it up but followed the official Fox video I posted a few posts back and it was pretty straight forward. Replaced all the seals when I was at it. It wasn't in too bad condition inside, after 2 years or so since last service but needed a clean out. No way I'll be paying €120 for that again in a shop.

The only thing that stumped me was trying to get screw the air can off. For the life of me I couldn't get it to move. Read online that the negative air chamber can hold pressure and keep the air can from screwing off. Pumped the shock back up to 150psi (on the bike). Let out 50 psi, cycle it through full stroke, let put 50 psi and repeat. Then the air can came straight off.

Did all pivot bearings when I was at it. Bought a bearing press which was useful but not perfect. Replaced BB, headset bearings, new brake lever, bled brakes. Back brake was a bastard to bleed - the lever (master cylinder) wouldn't take the fluid. Eventually some went through but it's not perfect. Front bled perfectly. Put new pads in too.

I think for €25 per brake, it's worth getting a shop to do the brakes - I spent waaay to long on the back brakes.

Also new stans valves and fluid in both tyres. Old valves were sticking and cores were bent.

Left to do are forks and dropper but might get the LBS to do them in the interest of getting back out on bike soonest.

covey123 · 22-07-2019 10:24pm

Fair play, I've two forks and shocks that are overdue that I've been putting off doing, must get the finger out and get stuck in!

boomdocker · 23-07-2019 9:24am

forks and shock - leave it to the experts in the bike shops, everything else can be done at home

I used to do my own forks, but then realised that the bike shop was doing them much better than I could. Simple things like using the correct grease makes a huge difference

Recently used Bikeology in Naas to have a fork and shock service done and they did a great job, really plush after the service
Expert Cycles in Rathfarnham as well

Wanderer78 · 23-07-2019 1:57pm

boomdocker wrote:

Recently used Bikeology in Naas to have a fork and shock service done and they did a great job, really plush after the service Expert Cycles in Rathfarnham as well

How much was that?

boomdocker · 23-07-2019 4:37pm

about 80 for the fork and 50 for the shock

steamsey · 24-07-2019 12:45pm

boomdocker wrote: »

about 80 for the fork and 50 for the shock

That's very reasonable. Back in the day OC Tuning would charge about €120 for each. Not sure if he was doing air can / lower or getting in any deeper than that.

€50 for rear air can service makes it probably worth getting the shop to do. Seal and oil kit costs €30-ish plus say hour of your time.

I think Expert were about €100 each for forks and shock but it's been a while.

iwillhtfu · 24-07-2019 4:59pm

The price will vary depending on the type of for and shock. I can't see how a store services a shock for €50 that would leave little to be made from it.

kirving · 28-07-2019 5:57pm

boomdocker wrote: »

forks and shock - leave it to the experts in the bike shops, everything else can be done at home

I used to do my own forks, but then realised that the bike shop was doing them much better than I could. Simple things like using the correct grease makes a huge difference

Recently used Bikeology in Naas to have a fork and shock service done and they did a great job, really plush after the service
Expert Cycles in Rathfarnham as well

To be fair, it doesn't take an expert to use the correct grease. All the specs are available online, the parts available in kits, and there are a myriad of instructional videos. If you can assemble Ikea furniture and have a basic socket set, you can service a fork.

People place quite a lot of mystery around their expensive bike, but there's nothing more to them than a few nuts and bolts really.

I do draw the line at specialist tools though, it sometimes just isn't worth investing in and the storing something like a wheel truing stand for example.

Caroline_ie · 02-08-2019 8:45pm

Mech Monkey in Belfast

https://www.facebook.com/mechmonkeybelfast/

Fox service

Comments