Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Question on fork maintenance

  • 21-10-2019 12:43pm
    #1
    Bot1
    Registered Users Posts: 190 ✭✭


    Hi
    I have a question on fork maintenance. Besides a bike wash and cleaning your forks is there any regular (after each ride or every second ride) general maintenance I should be doing on the forks?
    For example is there some kind of lubricant that should be applied?
    Cheers


Comments

  • #2
    rizzodun
    Registered Users, Registered Users 2 Posts: 2,598 ✭✭✭rizzodun


    Silicon or PTFE spray after each wash. Spray on the stanchions and seals, watch for overspray on brake rotors. Spray on, then pump the fork a few times and wipe off the dirt that comes from the seals. Before each ride spray some on a cloth and rub on stanchions too, let dry before the ride, don't use loads.

    Make sure it's silicon or PTFE so it doesn't rot the seals.


  • #3
    covey123
    Registered Users, Registered Users 2 Posts: 423 ✭✭covey123


    I normally put a small bit of fork oil on the stanchions with a small syringe,and compress them a few times then wipe clean, usually lifts a bit of gunk from the wiper seals


  • #4
    Bot1
    Registered Users Posts: 190 ✭✭Bot1


    Thanks folks!


Advertisement