Bike parts for trade?

cyco · 26-12-2008 2:00pm

any chance i could swap the paddywagon for a 54cm paddywagon?! Mine is a 54 seat tube centre to top and 56 top tube c-c in blue. what colour's yours? and toptube length?

also how deep are the deep wheels? and have a they a braking surface? looking for something all black with deep rim

Mr. Skeffington · 26-12-2008 2:27pm

Hi there Cyco, Id rather not swap the frame, mine is the 2008 model and its grey white and black, there is a picture of it over on Adverts if you want to take a look.

The wheels are from this bike:
http://www.giant-bicycles.com/en-GB/bikes/lifestyle/2469/32689/

As mentioned they are unridden, this bike was stripped from new. The wheels are really very deep, they have a good braking surface. The exact depth is 42mm and you will get a good idea of the look from the picture.

AfternoonBlue · 03-01-2009 5:06pm

Hi guys,

This may be a little off topic, not sure, so I'm sorry if it is. I was looking to get into road cycling as a sport and so was given a €300 voucher for a bike shop. The thing is the bike I liked is a little too expensive for me at the moment. I'd like to get going on the road sooner rather than later and I found the exact bike I want for a lot cheaper elsewhere.

Would anyone give me €250, or even a lower offer would be ok for the voucher? It's for Joe Daly in Dundrum.

Or what would possibly be better, swap a road cycle for the voucher and if you wanted more for it I could make up the difference in cash if it's not too much.

If this is too absurd a request, or to off topic, I'm sorry, but I'd like any help anyone can give me.

Cheers guys.

Karma · 03-01-2009 8:08pm

hey, cyco,
how much for that paddy wagon frame.
looking for a same one for a friend.
let me know.
regards
Karma

Mr. Skeffington · 03-01-2009 8:52pm

I will sell you my 56cm Paddy Wagon frame and fork, 2008 model, perfect condition with headset, bottom bracket and seat clamp for 180 if your interested

Karma · 04-01-2009 12:51pm

will check to see if it will be the right size for my friend.
cheers

Karma · 08-01-2009 1:56pm

mr. s
my friend found a 52 fuji. tjanks anywaqy and good luck with the sale. damn i missed your wheels and cranks.
good price.

Billy Whizz · 08-01-2009 2:01pm

On the lookout for a 110mm or 120mm quill stem. Will happily trade some stuff I have lying around or offer cash. Cheers.

scottreynolds · 09-01-2009 10:49am

Billy Whizz wrote: »

On the lookout for a 110mm or 120mm quill stem. Will happily trade some stuff I have lying around or offer cash. Cheers.

I have an old one, not bad condition but definately worn your are welcome to. Size -- 1" Threaded ? Looks like in inverted L.

Billy Whizz · 09-01-2009 1:50pm

scottreynolds wrote: »

I have an old one, not bad condition but definately worn your are welcome to. Size -- 1" Threaded ? Looks like in inverted L.

Thanks very much!

Yeah 1" is the size alright. Is it 110mm or 120mm? Quill stems look like this if you're in anyway unsure.

Let us know what you want in return, I have 70mm and 80mm quill stems if they interest you, plus odds and sods.

scottreynolds · 09-01-2009 2:02pm

Billy Whizz wrote: »

Thanks very much!

Yeah 1" is the size alright. Is it 110mm or 120mm? Quill stems look like this if you're in anyway unsure.

Let us know what you want in return, I have 70mm and 80mm quill stems if they interest you, plus odds and sods.

That image is much nicer looking than mine. I'll post you a piccy tonight with measurements. Its 120 I think. If you want it after that I'll post it Monday unless you live around North side in which case I'll drop it to ya.

I don't want anything for it .. well go on ... swim the liffey naked from O'Conell bridge to Customs House -- I'll leave it on the steps

Billy Whizz · 09-01-2009 2:06pm

scottreynolds wrote: »

That image is much nicer looking than mine. I'll post you a piccy tonight with measurements. Its 120 I think. If you want it after that I'll post it Monday unless you live around North side in which case I'll drop it to ya.

I don't want anything for it .. well go on ... swim the liffey naked from O'Conell bridge to Customs House -- I'll leave it on the steps

Ah you're far too kind - I live on the North Side and would certainly pick it up if available, wouldn't have you dropping it out to me!!! I'll be floating around tomorrow evening if you're about? Will swing by to your neck of the woods.

I can't swim

, even when I wear my lucky red togs.

scottreynolds · 09-01-2009 2:17pm

Billy Whizz wrote: »

Ah you're far too kind - I live on the North Side and would certainly pick it up if available, wouldn't have you dropping it out to me!!! I'll be floating around tomorrow evening if you're about? Will swing by to your neck of the woods.

I can't swim , even when I wear my lucky red togs.

My god -- I was very scared then -- I though you said my lucky red thong

Billy Whizz · 09-01-2009 2:23pm

scottreynolds wrote: »

My god -- I was very scared then -- I though you said my lucky red thong

:eek:

...back to the quill stem...

I'll send you a PM and see when you're around so.

Karma · 09-01-2009 8:43pm

tiny is looking for a 70/80mm stem, have larger ones to trade...

TinyExplosions · 09-01-2009 10:42pm

Yes, I have a 110mm quill stem to trade for a 70 or 80mm one -thought that the one mentioned above was gone

NeilMcEoigheann · 09-01-2009 11:02pm

AfternoonBlue wrote: »

Hi guys,

This may be a little off topic, not sure, so I'm sorry if it is. I was looking to get into road cycling as a sport and so was given a €300 voucher for a bike shop. The thing is the bike I liked is a little too expensive for me at the moment. I'd like to get going on the road sooner rather than later and I found the exact bike I want for a lot cheaper elsewhere.

Would anyone give me €250, or even a lower offer would be ok for the voucher? It's for Joe Daly in Dundrum.

Or what would possibly be better, swap a road cycle for the voucher and if you wanted more for it I could make up the difference in cash if it's not too much.

If this is too absurd a request, or to off topic, I'm sorry, but I'd like any help anyone can give me.

Cheers guys.

hey Afternoon blue. i'm buying a bike in joe dalys and i'll happily take the voucher for 250e, i actually didn't know they did vouchers, i would prefer to meet you there just to check its legit cos if i went to the gardai saying afternoon blue ripped me off i reckon they'd laugh,
may as well pm you too

AfternoonBlue · 09-01-2009 11:41pm

Cool man, I'll meet you there whenever you like, I like quite nearby.

Ah feck it. I'll pm you too.

t0mm · 10-01-2009 2:01pm

Hey guys,

I order a Specialized Tricross Single Speed http://www.pearsoncycles.co.uk/product/4422/SPECIALIZED_TRICROSS_SINGLE_2008_RRP_450_SAVE_175_NOW_27499 from peasons in a size 56cm. However I find this a little bit to big, but postage back is such a killer that I was wondering if anyone here was thinking of ordering one? I took it out of the box, set it up, sat on it and realised it was to big for me. Hasn't even been out of the house.

All up it cost me around €320, so offers around that much please (really you should give me more, setting it up and everything for you!;))

The frame still has its protective wrapping on, the rear hub is indeed flip-flop so it could be set up as a fixie if thats what you want.

In the South Dublin (D6) area, can provide pic's on request.

Billy Whizz · 10-01-2009 2:05pm

TinyExplosions wrote: »

Yes, I have a 110mm quill stem to trade for a 70 or 80mm one -thought that the one mentioned above was gone

Still on the lookout. You could have both the 70mm and the 80mm stems, I'm not going to use them! You around this weekend?

Edit: just let me make sure that I can find them!

NeilMcEoigheann · 10-01-2009 8:10pm

cheers afternoon blue all the best with the new bike, i know i can't wait to get mine

Chartsengrafs · 11-01-2009 10:51pm

Bit of a long shot here; would anyone have some Look Keo / SPD SL pedals they'd like to get rid of?! Particularly lower-end like 105 (cheaper!) types?

Thanks

Chartsengrafs · 11-01-2009 11:46pm

Apologies, just realised this is a 'swap' thread..

NeilMcEoigheann · 12-01-2009 10:08pm

Basster wrote: »

Apologies, just realised this is a 'swap' thread..

mmmm i reckon you can wing it on that one, just keeping it among cyclists.

Chartsengrafs · 12-01-2009 10:52pm

OK, cool! Ordered from Wiggle just now anyway. (Why did I get into this cycling lark?!) Bike I can't afford: check, lights; check, weird clothes; check, pedals; almost....!

Mr. Skeffington · 12-01-2009 11:10pm

Ok im updating the list of items that I have for sale, just clearing out the shed, some nice bits on offer:

1) KONA Paddywagon 56cm frame, fork, headset, bottom bracket & seat clamp - €170
2) Ritchey WCS 44cm (31.8mm) handlebars - 2 pairs - €25 each
3) Raceface Cadence bars 44cm (31.8mm) - 1 pair (New) - €20
4) Ritchey PRO 27.2mm seatpost, black - €15
5) Kona Seatpost 27.2mm black - €15
6) Raceface Cadence stem 110mm, 1 & 1/8" - €15
7) Silver alloy stem 110mm, 1 & 1/8" - €15
8) Tacx Turbotrainer Tyre - €10
9) Tacx Sweat Net - €5
10) Giant alloy stem 110mm, 1 & 1/8" - €15
11) FSA Sealed bottom bracket, new - €15
12) Kona alloy stem 110mm, 1 & 1/8" - €15
13) Tektro brake calipers, pair, silver, new - €25
14) Cane creek front brake caliper - €35

Any questions let me know, im based in Dublin, northside.

Cheers

Karma · 13-01-2009 1:58pm

so a little stock check of the big stuff:
track wheels "all tubs"
105 hub on old mavic rim
campy huub on mavic rim
mallard(french-duck i think?) rear hub with lockring thread
pilsener?(french) rear hub with lockring thread

looking for mtb v brakes, shifters and brake leavers and a mtb 9/8speed rear wheel.

haggling is just getting to know each other :P

have other bits but need a warm day to check it all(tiny knows what i mean)

TinyExplosions · 13-01-2009 2:09pm

Karma wrote: »

have other bits but need a warm day to check it all(tiny knows what i mean)

Sure it's not a Maillard hub -don't think ducks made bikes!

Karma · 13-01-2009 4:46pm

how is that "software build" going.... back to work you.
sure your right, but i cant spell, so i dont know :P

TinyExplosions · 13-01-2009 5:04pm

Karma wrote: »

how is that "software build" going.... back to work you.
sure your right, but i cant spell, so i dont know :P

Man, it takes its time

ROK ON · 13-01-2009 10:37pm

Hello folks.

I am looking for a stem, particularly a raised stem. Need to get the hoods a little closer to me (say by 2cm), to help alleviate some back pain.

Anyone got a spare one. Not sure what I could swap, but we could come to an arrangement.
Thanks.

Home:Ballyhoura · 13-01-2009 11:44pm

Hey guys, I'm looking for an old rear wheel (for 9speed Shimano) to be used on a turbo trainer only. Anything round, with spokes and a shimano fitting will do (preferably straight

)...not willing to spend much (if anything at all). That old wheel lying around uselessly in your shed is exactly what I'm looking for! Haha...thanks in advance!

AstraMonti · 14-01-2009 4:23pm

I have some Shimano M324 Pedals Single Sided that i don't find comfortable any more as i am always with the spd shoes. If someone has any clipless mtb pedals that would like to exchange (and i can give some money as well) please send me a pm. The pedals are almost new

Cheers!

peterk19 · 14-01-2009 7:51pm

Has anybody got any old 700x23c wheels any condition considered 7 speed cassette would be great with the rear too

steinone · 14-01-2009 8:30pm

AstraMonti wrote: »

I have some Shimano M324 Pedals Single Sided that i don't find comfortable any more as i am always with the spd shoes. If someone has any clipless mtb pedals that would like to exchange (and i can give some money as well) please send me a pm. The pedals are almost new

Cheers!

If the trade falls out dibs on buy.

penexpers · 15-01-2009 1:59pm

hey I have two single speed chain tensioners that I need to swap for one that might fit

One is the Shimano Alfine tensioner (missing spacers)

http://www.bikemagic.com/news/images/shimano07_alfine_hi.jpg

The other is this one,

http://www.sjscycles.co.uk/product-POWERPLAY-Powerplay-CHT100-Single-Speed-Chain-Tensioner-13370.htm

Both have only been mounted once or twice and never actually ridden.

I'd let them go for 10 euro each, or swap for a tensioner like this

http://www.on-one-shop.co.uk/acatalog/singulator.jpg

blorg · 15-01-2009 2:15pm

I have a brand new 16t 1/8" track cog that I'd like to swap for a 15t 1/8" track cog or sell for a tenner.

Home:Ballyhoura · 16-01-2009 8:13pm

Hi, I'm selling this Bontrager Race saddle.

**3rd & FINAL PRICE DROP** Down to only €25! BARGAIN! I will not go any lower than this!

NOTE: I can post anywhere in Ireland for €4 / €5!

This is a brand new Bontrager Race Saddle for sale. It came on my brand new Trek racing bike worth €1,000 euro and is only for sale as I want a white one. This saddle has only been used once on a test ride and immediately replaced with a new one (as a result there are no marks whatsoever and would pass as a new saddle, only there is no box and tags!). It is a lightweight saddle, ideal for those people looking to lose a few grams here and there.

No reasonable offer will be rejected, but it will only be sold to the person who makes the best offer. It's in Limerick, but contact me if you live further away, we might be able to organise something! Thanks in advance!

peterk19 · 21-01-2009 3:24pm

Does anybody need a Krytonite U-lock bike mount for a second bike?

I have a spare here i wont be needing

Karma · 21-01-2009 8:07pm

ah, dont use them- they damage the finish of the bike and the rust monster cometh... oh and just extra weight.

Karma · 21-01-2009 8:09pm

was in think bike in rathmines and they have those type of tensioners in the workshop.
hope this 'elps.

penexpers wrote: »

hey I have two single speed chain tensioners that I need to swap for one that might fit

One is the Shimano Alfine tensioner (missing spacers)

http://www.bikemagic.com/news/images/shimano07_alfine_hi.jpg

The other is this one,

http://www.sjscycles.co.uk/product-POWERPLAY-Powerplay-CHT100-Single-Speed-Chain-Tensioner-13370.htm

Both have only been mounted once or twice and never actually ridden.

I'd let them go for 10 euro each, or swap for a tensioner like this

http://www.on-one-shop.co.uk/acatalog/singulator.jpg

garo · 25-01-2009 11:01pm

Have a few things for sale/trade/give-away:

1. A Ritchey 24x1.6-2.0 latex inner tube. Made a mistake and ordered 24" instead of 26" from Chain Reaction Cycles. Cost me 4 Euro on a special. Supposedly, a good tube if you have a 24" wheel.

2. Shimano Alivio rear derailleur. Only two months old and used for commuting so has about 200km (road-only) on it. Works perfect. I've upgraded to LX.

3. Also have Shimano front and rear Alivio shifters+V brake levers but those are several years old. They work perfect. 7-speed.

4. An old MTB rear wheel, Shimano 7-speed. The rim has a small crack around one nipple so if you can use it for anything, you can have it.

Looking for a chain tool, any Park Tool tools, a decent new/used front MTB wheel (not disc brake). Open to other road/MTB/hybrid items, tools, cash etc. etc.

Home:Ballyhoura · 25-01-2009 11:07pm

garo wrote: »

4. An old rear wheel, Shimano 7-speed. The rim has a small crack around one nipple so if you can use it for anything, you can have it.

Hi, I was looking for a wheel to use on a turbo trainer. If you think this is ok for this purpose, I'd love to take it off your hands ! Provided it is a road wheel that is! Whereabouts are you based?

garo · 26-01-2009 2:10pm

Sorry, omitted to mention that it is a 26" wheel. I'm based in D3 and work in the city centre.

Karma · 26-01-2009 7:22pm

interested in the wheel Garo, can collect or meet. i should have a front mtb wheel for it.

garo · 26-01-2009 7:50pm

Sure we can meet in the city or D3. You do realize that there is small crack around a nipple on the rim and the wheel is about 8 years old and has about 5000k (mostly road) on it. Other than that it works fine and I've been riding it for my daily commute. Only changing it because I'm going to 9-speed.

peterk19 · 27-01-2009 10:13pm

Has anybody got a fixie wheelset they're Looking to get rid of and i may be interested in a crankset also

Karma · 28-01-2009 1:28pm

garo wrote: »

Sure we can meet in the city or D3. You do realize that there is small crack around a nipple on the rim and the wheel is about 8 years old and has about 5000k (mostly road) on it. Other than that it works fine and I've been riding it for my daily commute. Only changing it because I'm going to 9-speed.

will leave it then, misread it as a broken spoke.

blorg · 28-01-2009 2:01pm

Anyone interested in a brand new Surly Tuggnut? Doesn't fit my bike due to added mudguards and rack poking too far down into the track end. €20 makes it yours but you'll have to be quick as otherwise it is going back to Wiggle. Would swap for pair of MKS tugs either if they would fit.

souter · 29-01-2009 10:39am

specialities mint 47t, fits sugino zen crankset. May be of interest to any of the new tricross owners.
swap for a 18t cog or charitable donation.

Bike parts for trade?

Comments