AirsoftEire.com - Online & Retail Store In Dundalk

AirsoftEire.com · 09-05-2013 12:20pm #1

Hi everyone.
We thought we'd re-open our thread here on Boards.ie to allow customers to ask any questions they may have, along with our current email, phone, Facebook and Youtube channels.

Give us a call any time on 042 9351155.
Our website is of course www.airsofteire.com .
Or drop into our store in Dundalk:

AirsoftEire
Unit 17A
Northlink Retail Park
Coes Road
Dundalk
Louth

Thanks guys.

Stephen and Liam

AirsoftEire.com · 09-05-2013 12:23pm

We'd also like to apologise for the last 30 hours or so of downtime with our website.

For those interested, at approx 22.30 on 07/05/2013 a RAID controller in a SAN participating in the storage area network failed causing corruption on two LUNs.

LUNs are currently being rebuilt and all disks are being checked for consistancy.

We hope to be back online by sometime between 4pm and 10pm.

Apologies to all again.

Stephen

Kashkai · 09-05-2013 1:44pm

AirsoftEire.com wrote: »

We'd also like to apologise for the last 30 hours or so of downtime with our website.

For those interested, at approx 22.30 on 07/05/2013 a RAID controller in a SAN participating in the storage area network failed causing corruption on two LUNs.

LUNs are currently being rebuilt and all disks are being checked for consistancy.

We hope to be back online by sometime between 4pm and 10pm.

Apologies to all again.

Stephen

Now I know I'm getting old! You lost me after ".....07/05/2013 a......." :-)

AirsoftEire.com · 09-05-2013 1:46pm

Basically they tried turning it off and on again, but it didn't work.

Kashkai · 09-05-2013 10:56pm

AirsoftEire.com wrote: »

Basically they tried turning it off and on again, but it didn't work.

Ah right. They should have used the tried and trusted traditional method, ie give it a thump!:D

ricka · 09-05-2013 11:06pm

Good to see you guys back, welcome!

I Armour I · 09-05-2013 11:47pm

Definitely good to see you on Boards. You should post up *Every single product you have so people can still email and order

*to be taken light hearted

Anyway Do you have any Multicam BDU's in a Medium (32W 30L, 46" chest)? and maybe a pistol lanyard?

AirsoftEire.com · 10-05-2013 12:37am

We have plenty of Multicam in medium indeed, they're €44.99 for the set.
ASG black lanyards are in stock too at €11.99.

I Armour I · 10-05-2013 1:17am

AirsoftEire.com wrote: »

We have plenty of Multicam in medium indeed, they're €44.99 for the set.
ASG black lanyards are in stock too at €11.99.

Do you know if the BDU's are rips stop material?

If you have any more details there that would be perfect

AirsoftEire.com · 10-05-2013 12:30pm

Honestly we aren't sure, they're Chinese copies but good quality. No spec sheets for them but they are hard wearing.

AirsoftEire.com · 10-05-2013 7:25pm

Website is back online! 60 hours of downtime, a disaster for business and apologies to all.
We've reverted to a 3 week old backup so a few products will have to be re-uploaded and stock levels adjusted.

We should be back to normal by the close of business on Saturday.

Stephen

I Armour I · 10-05-2013 8:21pm

Cheers! Will be making an order in 5 minutes!

is the RCI discount available?

Kevd210 · 11-05-2013 9:03pm

Can you get the. ra-tech co2 mags for a kwa/glock 18c & how much, also can u get the caa Roni carbine conversion kit for glock & price
Thanks

AirsoftEire.com · 13-05-2013 1:19pm

Lil Armour wrote: »

Cheers! Will be making an order in 5 minutes! is the RCI discount available?

Hi there.
As far as I am aware this was an in-store deal, I'd have to check with Liam.

Kevd210 wrote: »

Can you get the. ra-tech co2 mags for a kwa/glock 18c & how much, also can u get the caa Roni carbine conversion kit for glock & price
Thanks

In regards special orders, the way we work it is from www.redwolfairsoft.com only. If they have it, it is in stock and in the case of guns under 1 joule, we can get it.

We order with them every 6 weeks or so, delivery takes about 2.5 weeks after that. Our next order is in about 5 weeks.

S.E.A.L.s · 14-05-2013 11:47am

Received my latest order yesterday and I'm very happy with the excellent customer service as always

Many thanks for everything

AirsoftEire.com · 14-05-2013 6:08pm

S.E.A.L.s wrote: »

Received my latest order yesterday and I'm very happy with the excellent customer service as always

Many thanks for everything

Great to hear, many thanks.

A few new items in stock:

Marui M9A1

Marui P226

ICS M1 Garand

Eoghan S · 17-06-2013 11:06pm

Hey
Just wondering how much it would put me back to get the magazines on my WE Dragon 5.1 fixed, one has a broken feeding nozzle (where the bb enters the chamber) and the other has the plastic part at the bottom of the mag broken.
As far as I know, the broken bottom causes no actual damage to the performance of the mag though, could you confirm this for me?
Thanks for your time

AirsoftEire.com · 10-07-2013 5:27pm

Sorry for the very late reply, we were waiting for word back on parts. WE UK still have no magazine parts i'm afraid.

In products news, we have fresh pallet of 0.2g 3700 Excel BBs.

€12.99 for a bag of 3700.

€104.99 for a box of ten bags, save 20%:

We also have WE's near entire range of pistols and magazine arriving in about 1 weeks time.

Eoghan S · 11-07-2013 10:49pm

Hey guys
Thanks for the info above
Probably won't be able to, but can you get in just a single Maruzen APS-2 trigger sear?
Mine snapped neatly in two, and I'm trying to replace it, as I plan a few games soon

http://www.pcb-airsoft.com/epages/PCB.mobile/?ObjectPath=/Shops/PCB/Products/PDI-ACC-APS2TRGSEAR&Locale=en_GB
That's it there, can't find it anywhere else really, but I think red wolf airsoft had it once upon a time

And if you manage it, any chance you could get APS-2 magazines too?
Might as well ask

Thanks

AirsoftEire.com · 15-07-2013 3:04pm

Sorry, we have no access to Maruzen parts any more.
Your best bet is to order directly yourself if you see something in stock.
Thanks,
Steve

Eoghan S · 15-07-2013 8:08pm

AirsoftEire.com wrote: »

Sorry, we have no access to Maruzen parts any more.
Your best bet is to order directly yourself if you see something in stock.
Thanks,
Steve

No bother, thought I might as well ask
I found the parts I need on ehobby, just prefer to buy in Ireland!
Thanks anyway

i am awsome · 18-07-2013 12:36am

can you guys get an outter barell for a kjw kp 06????

AirsoftEire.com · 18-07-2013 1:23pm

Unfortunately not, KJ works are no longer replying directly us for some reason.

se conman · 18-07-2013 1:55pm

Hey lads, what weight 8mm BB's have you in stock?

AirsoftEire.com · 20-07-2013 4:07pm

Sorry, all out of stock at the moment! Last three bags went out to the same customer. Hope to have more in about 4 weeks, bit of a wait unfortunately.

EDIT, I tell a lie, we have x2 Marushin 0.4g 8mm 500 rounds left.

se conman · 20-07-2013 5:57pm

AirsoftEire.com wrote: »

Sorry, all out of stock at the moment! Last three bags went out to the same customer. Hope to have more in about 4 weeks, bit of a wait unfortunately.

EDIT, I tell a lie, we have x2 Marushin 0.4g 8mm 500 rounds left.

HaHaHa, that was to me.

MajorMax · 23-12-2013 4:26pm

Any chance of you getting the Dan Wesson wood style revolver grip from ASG in stock?

AirsoftEire.com · 23-12-2013 5:26pm

Yup, they're on backorder, will be in stock in late January.
Thanks.

MajorMax · 24-12-2013 1:31pm

AirsoftEire.com wrote: »

Yup, they're on backorder, will be in stock in late January.
Thanks.

I'll be there. I know airsoftguns in Limerick have them, but I find them difficult to deal with.

Love your shop. Picked up my Xmas pressie from you last Saturday G&G G4 G26, well impressed with your stock selection

Daz1214 · 27-12-2013 1:19am

Hi Folks

Would you have a co2 mag that would suit the ASG m9 heavy weight?

Thanks

AirsoftEire.com · 28-12-2013 6:12pm

Hi there.
If you mean the ASG (KJ) M9, then this magazine will work great:

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=841&category_id=206&manufacturer_id=0&option=com_virtuemart&Itemid=26

flynn353 · 02-02-2014 6:12pm

How ye lads,

Just wondering do ye do special orders? Got a voucher at Xmas and looking for 3 parts.

1: Laylax/nine ball lanyard point for a TM PX4
2: Feed lips for TM PX4 magazine
3: Base plate for TM PX4 magazine

Cheers,
Paul

AirsoftEire.com · 04-02-2014 4:44pm

Hi Paul.
Sorry for the late reply, we deal mainly with our own email system and Facebook. To be honest for small parts like that, you would be better ordering them directly yourself from eHobby or Redwolf; we would only be doing the same and it would work out more expensive.

Thanks,
Steve

flynn353 · 05-02-2014 8:01pm

Hi,

Thanks for the honest answer Steve. The main reason I'm asking is that I have a voucher for you and to be honest, I dont buy outside of the EU, too much hassle haha. Could you give me a quote for what those few bits would cost to get through ye?

Thanks,
Paul

AirsoftEire.com · 07-02-2014 2:07pm

Hi Paul.
Have you seen these parts listed anywhere? We have no access to Marui parts other than parts we have from parts guns.
Due to the reliability of Marui pistols, we have a single Glock 18C for parts, that's it i'm afraid.

flynn353 · 08-02-2014 1:14am

Lanyard: here

Ive seen "enhanced" mag lips by SD i think, the normal baseplate I havent seen though, only the nineballrubber ones.

Paul

AirsoftEire.com · 08-02-2014 2:40pm

Hi Paul, PM sent.

Thanks,
Steve

shnburn · 13-06-2014 8:06pm

Do you have any mags and stock for an gas kwa/asg m93r thanks

i am awsome · 18-06-2014 1:19am

Could you guys get either the co2 or gas KJW KP - 07 meu style 1911,if so, for how much? It looks amazing, but can't be found in Ireland, probably the closest to it would be the new STI TAC MASTER DESERT in MIA, which is also full metal. Thanks guys, let me know, highly appreciated!

AirsoftEire.com · 21-06-2014 5:10pm

shnburn wrote: »

Do you have any mags and stock for an gas kwa/asg m93r thanks

Yes we have some in store, they are not listed on the website yet. Give us a call in the shop for prices.

AirsoftEire.com · 21-06-2014 5:11pm

i am awsome wrote: »

Could you guys get either the co2 or gas KJW KP - 07 meu style 1911,if so, for how much? It looks amazing, but can't be found in Ireland, probably the closest to it would be the new STI TAC MASTER DESERT in MIA, which is also full metal. Thanks guys, let me know, highly appreciated!

Hello
Just had a quick check with some of our suppliers and no one has it in stock

Kevin Moran · 23-07-2014 6:17pm

Hi Guys, ye wouldn't have the CYMA CM057S (SVD with folding stock) in stock or could come across one?
Thanks in advance

Kevin Moran · 22-10-2014 10:57am

Was wondering do you guys stock the CYMA 057S, that's the Dragunov with the folding stock, in store? Seriously thinking of picking up one before Xmas and wanted to feel the ergonomics, particularly looking down the sights/scope and how access/use of the trigger is affected when the stock is folded closed. Also, if you do have it in stock, what method was used to downgrade the fps?
Thanks in advance

ben51 · 24-06-2016 8:39pm

was wondering how much you guys would charge for a high speed motor and a gearbox that could use a 7.4 volt lipo and installation into a g and g raider , looking to upgrade a few old guns and like dealing with you guys

Voodoomelon · 24-06-2016 9:11pm

AirsoftEire aren't active on Boards.ie any more, best to contact them directly.

ben51 · 24-06-2016 9:29pm

ah okay thanks

AirsoftEire.com - Online & Retail Store In Dundalk

Comments