Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Tamper Sensor

  • 26-07-2010 4:35pm
    #1
    TV4Ever
    Registered Users Posts: 26 ✭


    Hi,

    A PIR sensor in my kitchen was moved to allow some work to be done and this set off the tamper alarm. The sensor has been replaced but the alarm won't set unless this sensor is inhibited - gives a Tamper Alarm message.

    Does anyone know to reset this so that I can set the alarm and include this sensor? Do I need the engineering code? (which I don't have).

    It's an Eircom Phonewatch HKC wired alarm and is no longered monitored.

    Any help appreciated.

    Thaniks


Comments

  • #2
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Take the cover off the PiR & hold in the small tamper spring or button you see on the PCB . If that works then replace the cover ensuring the lid is catching the tamper switch.


  • #3
    TV4Ever
    Registered Users Posts: 26 ✭TV4Ever


    That sorted it. Thanks a million.


Advertisement