Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
Adding Hkc alarm sensor
-
03-06-2021 10:24am#1Hi guys
I'm just wondering if this is DIY'able, as I can't get hold of the original installer.
The sensor below is on a garage door that's had an additional door added in the room, and I wanted to put another sensor on said door. I've ran 6 core cable from the new point and it's beside the original sensor, but I'm wondering can I add the second sensor in series with this one or does it need to go back to the panel (which I can run the wire to)
Any help appreciated0
Comments
-
Hi guys
I'm just wondering if this is DIY'able, as I can't get hold of the original installer.
The sensor below is on a garage door that's had an additional door added in the room, and I wanted to put another sensor on said door. I've ran 6 core cable from the new point and it's beside the original sensor, but I'm wondering can I add the second sensor in series with this one or does it need to go back to the panel (which I can run the wire to)
Any help appreciated
Yes you can run it in series using that sensor to new device.0
Advertisement