Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Leaking U Oipe

  • 13-06-2021 2:47pm
    #1
    size5
    Registered Users Posts: 266 ✭✭


    Have a leaking under pipe under bathroom sink. When tap is flowing at half volume no issue. When tap is at full flow the water leaks out where I have circled. It’s as if water can’t get out U pipe quick enough leading to a build up and leak.

    All fittings appear nice and tight-suggstions


Comments

  • #2
    tDw6u1bj
    Registered Users, Registered Users 2 Posts: 207 ✭✭tDw6u1bj


    You picture isn't showing.

    Tight doesn't mean not leaking. Over-tightening causes leaks too.
    It's a matter of all seals being seated properly, and obviously that no parts are damaged.

    If you want to tackle this yourself then take the leaking joint apart, check all the seals looking for pinch-marks etc. and put it back together hand-tightening only.


  • #3
    fulanoquetal
    Registered Users, Registered Users 2 Posts: 51 ✭✭fulanoquetal


    tDw6u1bj wrote: »
    You picture isn't showing.

    Tight doesn't mean not leaking. Over-tightening causes leaks too.
    It's a matter of all seals being seated properly, and obviously that no parts are damaged.

    If you want to tackle this yourself then take the leaking joint apart, check all the seals looking for pinch-marks etc. and put it back together hand-tightening only.

    Additionally, make sure that everything is aligned vertically. If you have to push or pull a pipe horizontally to connect it then when you ley go, the pipes may tend to want to move back and that will introduce a gap.


  • #4
    size5
    Registered Users Posts: 266 ✭✭size5


    tDw6u1bj wrote: »
    You picture isn't showing.

    Tight doesn't mean not leaking. Over-tightening causes leaks too.
    It's a matter of all seals being seated properly, and obviously that no parts are damaged.

    If you want to tackle this yourself then take the leaking joint apart, check all the seals looking for pinch-marks etc. and put it back together hand-tightening only.

    Cheers for the above took more detailed look and discovered seal was missing so got it sorted


Advertisement