Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Aspire Odan coil question

Options
  • 15-05-2020 11:40am
    #1
    the_syco
    Registered Users Posts: 37,295 ✭✭✭✭


    Hi all,

    Saw on RepublicOfVape regarding the Odan coils of the recommended wattage, and confirmed it on the Aspire site.
    0.18 Ω – Mesh Coil (60 – 80 W)
    0.2 Ω – Mesh Coil (50 – 60 W)
    0.3 Ω – Mesh Coil (35 – 45 W)

    My mod is a Smok GX2, using in the dual 18650 configuration.

    My issue is that when I used 0.2 Ω I'd use 18W or 0.3 Ω I'd use 22W, as going higher (20W on the 0.2 Ω or 25W on the 0.3 Ω) I found the coil to start dying nearly instantly; all flavour would go, it'd start to taste burnt, and would often stay that way. But yet the Aspire site advises me to use a higher wattage.

    Any ideas what could be the issue on why the coils go bad at watts a lot lower than the recommended watage?


Comments

  • Options
    #2
    corkie
    Registered Users Posts: 7,146 ✭✭✭corkie


    Not on an expert on it by any matter, stock coils have a recommended watts for two reason.

    Below: - Ejuice just gunk's up the coil & cotton and doesn't vape/wick properly.
    Over: - You risk burning out the coil.

    https://www.google.com/search?&q=recommended+watts+on+coils+why


    Edit: - Also look at the recommended VG/PG ratios for the coils in use, so they can wick properly?
    https://ecigone.com/e-cigarette-basics/aspire-coils-burning-out-fast/

    The Digital Services Act 2024 [EU] ~ Social Media and You ~ Nanny State guidance for parental monitoring of apps ~ Censorship: - broad laws that will probably effect Adult use of same.



  • Options
    #3
    daredevil360
    Registered Users Posts: 144 ✭✭daredevil360


    I have the Odan mini and by far the best coil of the three available is the 0.18 @80Watts it produces the best flavor .Decent flavor from the other two variants at their recommended wattage but i prefer a warmer vape , running a mesh coil lower than its recommended wattage is the reason you are not getting any flavor and as corkie said you're gunking up the coil


  • Options
    #4
    Mad_Mike
    Registered Users Posts: 1,623 ✭✭✭Mad_Mike


    Using wattages that low, the coil isn't even heating to the right temperature, so the liquid can't vaporise and as the lads said above, that will just clog up the coil.


Advertisement