If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Windows thermal imaging

cavagirl · 2019-05-28 13:00:19

Hi, Had a thermal imaging survey done and one of the issues highlighted was from a newly installed bay window, it shows both ends of frame and in corners of sill have a huge difference in temp(shows up black) than everywhere else. It seems to be metal rods that run whole length of frame, so we are assuming that they are…

28-05-2019 2:00pm

#1

cavagirl

Registered Users Posts: 19 ✭

Join Date: March 2013

Posts: 14

Hi,
Had a thermal imaging survey done and one of the issues highlighted was from a newly installed bay window, it shows both ends of frame and in corners of sill
have a huge difference in temp(shows up black) than everywhere else. It seems to be metal rods that run whole length of frame, so we are assuming that they are
not working efficiently, would this be normal would any body know, before I contact window company??

0