Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Poweredge error

  • 07-09-2018 9:24am
    #1
    -Toppy-
    Registered Users, Registered Users 2 Posts: 557 ✭✭✭


    Just wondering if anyone has ever seen an error like this on their poweredge?
    CBL0008: Backplane 1 connector PCIe A is incorrectly connected to Unknown SGPIO

    Reseated everything but error still occurs

    Cheers
    Toppy


Comments

  • #2
    opus
    Registered Users, Registered Users 2 Posts: 5,027 ✭✭✭opus


    Never seen anything like that, only thing I can suggest is pull out the power cord(s) & hold down the power button for ~20 secs to drain everything & then power it up again. One of the servers where I work never recovers from a power down without some tlc like that!


  • #3
    ZENER
    Registered Users, Registered Users 2 Posts: 6,163 ✭✭✭ZENER


    What model is it ? BIOS Version ? Service Tag ?

    Are there any PCIe cards installed ? Which slot is it in ? How many CPUs ?

    CBLxxxx errors are cable related. SPGIO is connected with the backplane for the hard disks so there might be an issue with the cable from the PERC to the backplane. A bit more info on the specific model would help to narrow it down.

    Ken


  • #4
    -Toppy-
    Registered Users, Registered Users 2 Posts: 557 ✭✭✭-Toppy-


    Ah I ment to reply sooner - I reseated all the cables at the front part of the backplan near the fans/disks and lo and behold error was cleared. So we are just putting down to a loose cable at this stage
    Cheers
    Toppy


Advertisement